stuck knock sensor!
06-18-2011, 01:41 PM
#1
Teching In
Thread Starter
Join Date: Jun 2011
Location: J-actionville, N.C.
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
stuck knock sensor! Need help! I know this is not internal, but the front knock sensor is stuck in my ls1. It will turn, but its not coming out. All it does is spin freely and the actual bolt is not even moving. How can I fix this?
06-18-2011, 01:59 PM
#2
Is it just the very top turning, but not the sides?
Have you tried using a long flat tip screw driver and a hammer on the outer circumference of the KS body to try and loosen it up and remove it?
Have you tried using a long flat tip screw driver and a hammer on the outer circumference of the KS body to try and loosen it up and remove it?
Last edited by 99Bluz28; 06-18-2011 at 02:10 PM.
Trending Topics
06-21-2011, 08:07 AM
#8
Teching In
Thread Starter
Join Date: Jun 2011
Location: J-actionville, N.C.
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Hey man I got the bolt off. Taking the valley cover helped alot. After I did that took a bolt extractor and came right off. Now I can continue w/ the rest of work. Thanks alot again.
08-07-2011, 08:57 PM
#9
Teching In
iTrader: (2)
Join Date: Jul 2011
Location: Hurst TX
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
I had the same problem, took a chance with the air tools. I started spinning the sensor and tilted the air gun in slight dirctions and it started to spin right off.
threw a couple of sparks, but nothing went wrong...
threw a couple of sparks, but nothing went wrong...
