CNC Ported Throttle Body Dynographs - 2010 Chevrolet Corvette GS
#1
Banned
Thread Starter
iTrader: (331)
Join Date: Feb 2005
Posts: 768
Likes: 0
Received 0 Likes
on
0 Posts
CNC Ported Throttle Body Dynographs - 2010 Chevrolet Corvette GS
http://www.facebook.com/media/set/?s...8.290698632469
http://www.facebook.com/media/set/?s...15.36075534753
Both these links are off our Facebook Fan Pages, please do "Like" them. TIA.
I've uploaded dynographs of our CNC ported TB on a 2010 Chevrolet Corvette GS A6 that is completely stock with 1200 miles on the clock.
The first set will show the temperature that day taken from an iPhone and then the two back to back runs with A/F without the ported TB.
The second set will show the temperature that day taken from an iPhone and then the two back to back runs with A/F with the ported TB.
The car was driven after the ported TB was put in for about 5 miles before dynoing it today.
The HP/TQ gain is low compared to others that have dynoed with our same ported TB but the result was still very positive as the goal is to provide upper more crisp throttle response in the mid and upper RPMS. Note all cars are different due to mileage, etc. etc. so your gains will be more or less.
If you have any questions, please do e-mail us or call us as we may not be readily available on LS1TECH to answer questions you may post here.
You can purchased these CNC ported TBs here ...
http://www.byunspeed.com/index.php?manufacturers_id=501
http://www.facebook.com/media/set/?s...15.36075534753
Both these links are off our Facebook Fan Pages, please do "Like" them. TIA.
I've uploaded dynographs of our CNC ported TB on a 2010 Chevrolet Corvette GS A6 that is completely stock with 1200 miles on the clock.
The first set will show the temperature that day taken from an iPhone and then the two back to back runs with A/F without the ported TB.
The second set will show the temperature that day taken from an iPhone and then the two back to back runs with A/F with the ported TB.
The car was driven after the ported TB was put in for about 5 miles before dynoing it today.
The HP/TQ gain is low compared to others that have dynoed with our same ported TB but the result was still very positive as the goal is to provide upper more crisp throttle response in the mid and upper RPMS. Note all cars are different due to mileage, etc. etc. so your gains will be more or less.
If you have any questions, please do e-mail us or call us as we may not be readily available on LS1TECH to answer questions you may post here.
You can purchased these CNC ported TBs here ...
http://www.byunspeed.com/index.php?manufacturers_id=501
Last edited by COSPEED; 06-22-2011 at 02:18 PM.