AC not blowing cold(WTF)
#1
TECH Addict
Thread Starter
iTrader: (1)
Join Date: Nov 2007
Location: Narnia
Posts: 2,372
Likes: 0
Received 0 Likes
on
0 Posts
AC not blowing cold(WTF)
I never seen anything like it. This is on a POS Honduh I am building out of random parts.
Here it goes.
I built the AC system, pretty much.
Some decent lines, decent looking compressor, bad dryer, stocker evaporator core, TXV and condenser core.
I evacuated the system for about 45 minutes(held solid vacuum), pumped it with one can then another one.
Nothing, the AC vent temp is 85 degrees.
I added fresh oil to the compressor and blew out the lines before I put it under vacuum.
Pressures are 35-40 & 200-230
I monitored the pressures as added each can. Compressor kicks in and out. Blower motor hums just fine.
Can I get a WTF?
Here it goes.
I built the AC system, pretty much.
Some decent lines, decent looking compressor, bad dryer, stocker evaporator core, TXV and condenser core.
I evacuated the system for about 45 minutes(held solid vacuum), pumped it with one can then another one.
Nothing, the AC vent temp is 85 degrees.
I added fresh oil to the compressor and blew out the lines before I put it under vacuum.
Pressures are 35-40 & 200-230
I monitored the pressures as added each can. Compressor kicks in and out. Blower motor hums just fine.
Can I get a WTF?