BPG

iTrader: (4)

What is the blue fitting size that screws into the N2O solenoid between the feed line from the bottle, to the noid? I cross threaded it while moving the noids around... and now its leaking like crazy. Its on a HSW Sudden Impact kit if that matters at all... so whatever the stock size it...

krissoto

iTrader: (3)

the fitting that screws into the noid, should be 1/8" pipe, and depending on the size of feed line, could be 3an/4an.

BPG

iTrader: (4)

Thanks. Its the "stock" feed line... should be 4an, no?

krissoto

iTrader: (3)

Some are diff, I believe on my HSW kit, the fitting on the plate is a 3 an

Graham@NitrousOutlet

The inlet fitting on the solenoid, what connects the mainfeed line to the nitrous solenoid is going to be 1/4NPT x 4an on that system I think.

BPG

iTrader: (4)

thanks, graham. i just said screw it...and bought one of every fitting i thought it "might" be....

Graham@NitrousOutlet

Nothing succeeds like excess.