*The Fikse FM5 thread*
#6
Profil 5's....first of their kind (for 4th gen's) in this finish.
18 x 9.5 (+38mm - offset to clear CTS-V binders)
18 x 11 (+19 - 1" narrowed rear)
Simulated install on the car...
18 x 9.5 (+38mm - offset to clear CTS-V binders)
18 x 11 (+19 - 1" narrowed rear)
Simulated install on the car...
Last edited by LPE 403; 07-26-2011 at 02:19 PM.
Trending Topics
#8
#10
Paid $300 for the rears (the pair) ...from a local guy. Nice to find a deal once in awhile. Found the fronts on-line but still paid $500 shipped. All and all pretty good considering I at one point was going to put Pilots on them Tires should last a few years or few days depending on how heavy the foot is
The following users liked this post:
99 Black Bird T/A (05-21-2022)
The following users liked this post:
Kai Lin Chu (07-09-2019)
#14
The following users liked this post:
Kai Lin Chu (07-09-2019)
The following users liked this post:
Kai Lin Chu (07-09-2019)
#16
#17
TECH Enthusiast
iTrader: (10)
Fikse,
Sorry, don't mean to hijack, but noticed you on the forum. What can be done about older Fikse wheels that need some TLC? My centers (FM10s) have some etching on them. All I ever did was wash with soap and water. Thought about sending the centers to get powder coated, but don't have the torque specs for the bolts and believe I would need to order new bolts from you?
Any help or feedback would be appreciated!
Sorry, don't mean to hijack, but noticed you on the forum. What can be done about older Fikse wheels that need some TLC? My centers (FM10s) have some etching on them. All I ever did was wash with soap and water. Thought about sending the centers to get powder coated, but don't have the torque specs for the bolts and believe I would need to order new bolts from you?
Any help or feedback would be appreciated!
#18
Fikse,
Sorry, don't mean to hijack, but noticed you on the forum. What can be done about older Fikse wheels that need some TLC? My centers (FM10s) have some etching on them. All I ever did was wash with soap and water. Thought about sending the centers to get powder coated, but don't have the torque specs for the bolts and believe I would need to order new bolts from you?
Any help or feedback would be appreciated!
Sorry, don't mean to hijack, but noticed you on the forum. What can be done about older Fikse wheels that need some TLC? My centers (FM10s) have some etching on them. All I ever did was wash with soap and water. Thought about sending the centers to get powder coated, but don't have the torque specs for the bolts and believe I would need to order new bolts from you?
Any help or feedback would be appreciated!
The following users liked this post:
Kai Lin Chu (07-09-2019)