60fthnter

Does nitrous outlet make a dual stage 102mm plate? Or can you guys make one?

Graham@NitrousOutlet

Do we ever let you down?

60fthnter

No, lol. What is the price on just the plate ?

87silverbullet

iTrader: (11)

You guys are some badass guys. We ask and ya'll deliver.

60fthnter

Are there any clearance issues with the water pump or any other fitment issues?

Graham@NitrousOutlet

429.99. With jetting and installation bolts.

Also, the one about is a custom plate we did awhile back. The ones currently offered are clean anodized and etched like all our plate's.

I can shoot you guys a mock up picture of the current plate on a 102 if you would like.

Graham@NitrousOutlet

I have had a few guys say they had some very minor issues and did a touch of clearance but that is it. It seems with the 102 stuff there is a lot of minor fitment issues all the way around.

1nasty86

iTrader: (63)

Hhhmmm.. I have a stock ls3 rail'd 102 would this kit work on my intake or does it have to be an aftermarket rail

Graham@NitrousOutlet

That was a custom hardline setup we did. We have a 102 in house, I think we can find some rails and build you something similar.

slippi84

iTrader: (4)

I have a TBSS with a ls7 short style 102 like the one in the picture with a 102 DBW TB I know my front accessory bracket for my alternator is close you guys have a way of figuring out if this will work for my setup. Def interested in going with a dual 100 shot

Nitro Dave's Nitrous Outlet

iTrader: (25)

No, you will not have any clearence issues with the waterpump. When we first designed the 102 plates we had a few road bumps getting the design layed out. That was a year ago though. Fits great now.
Dave

Nitro Dave's Nitrous Outlet

iTrader: (25)

I dont think it would work. Our single stage 102 truck plates have the inlet fittings on the passengerside because of the accessory bracket being in the way on the drivers side. So unless you changes that up you would need our single stage truck plate.

Dave

Nitro Dave's Nitrous Outlet

iTrader: (25)

For anyone wanting a custom dual stage hardline plate system similiar to the one above we have a few options. From the solenoids to the plate is no problem. But if you want the fuel side plumbed in as well we would need your injectors and fuel rails to do so. The reason why is there are way to many injector and fuel rail combinations available for this intake.

Dave