New from San Antonio/Houston TX
07-31-2011, 03:40 PM
#1
Teching In
Thread Starter
Join Date: Jul 2011
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
New from San Antonio/Houston TX Hello all;
Everyone calls me Ernie. I am stuffing a LS1 into a 91 Mustang Fox Body and trying to make it as light as possible. Just found a set of heads and short block. Needing help in cam selection and other acc. items for the engine. Great site with lots of info.
Everyone calls me Ernie. I am stuffing a LS1 into a 91 Mustang Fox Body and trying to make it as light as possible. Just found a set of heads and short block. Needing help in cam selection and other acc. items for the engine. Great site with lots of info.
08-02-2011, 07:03 AM
#3
Teching In
Thread Starter
Join Date: Jul 2011
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Right now I am starting with a set of 241 castings which look pretty good for a start. I am going to use the Texas Speed 233/239 112lsa, 11:1 compression, LS6 intake (have to find one first). Transmission 4L80E with a 2500 stall, 9 inch rear with 3.89 gears.
I have a few Mustang buddies that put down Camero's, Corrvette's, etc.. So I am going to **** them off and show them what a Mustang should run like with a Chevy Engine on pump gas....lol
I have a few Mustang buddies that put down Camero's, Corrvette's, etc.. So I am going to **** them off and show them what a Mustang should run like with a Chevy Engine on pump gas....lol
