2008 2500 6.0 with 823 heads. 81 vette swap!
08-03-2011, 01:02 PM
#1
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: TEXAS
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
2008 2500 6.0 with 823 heads. 81 vette swap! I found a 2008 6.0 low miles. Is this a LQ4 or LQ9 or what. I have been looking for a LS1 with a 6/speed and have had no luck. So Im going to do a 6.0 6/speed instead.
Do I need to get the wire harness and computer with it?? or because Im going to have to have a Fbody intake and T/B am i going to need a F/body computer?? and aftermarket harness? This 6.0 has a drive by wire T/B. Not sure if I need a Cable or DBW T/B..
Gonna need your help here guys. Thanks.
Oh, will a 98/2002 T56 work on the 2008 6.0. Not sure if they have the crank drilled out for a pilot bearing.
Do I need to get the wire harness and computer with it?? or because Im going to have to have a Fbody intake and T/B am i going to need a F/body computer?? and aftermarket harness? This 6.0 has a drive by wire T/B. Not sure if I need a Cable or DBW T/B..
Gonna need your help here guys. Thanks.
Oh, will a 98/2002 T56 work on the 2008 6.0. Not sure if they have the crank drilled out for a pilot bearing.
