1999 Chevy Silverado RCSB stepside Built LQ9 400+rwhp $5500 this week only
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: May 2009
Location: Walker,LA
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
1999 Chevy Silverado RCSB stepside Built LQ9 400+rwhp $5500 this week only
Year: 1999
Make: Chevrolet
Model: Silverado 1500
Price: $5500
Mileage: 1000
Private or Dealer Listing: Private Listing
Location (State): LA
Color: Silver
Transmission: Automatic
Drivetrain: Rear Wheel Drive
LS Engine?: Car has LS engine
Last edited by pellhum21; 08-08-2011 at 08:40 PM.
#5
Teching In
Thread Starter
iTrader: (1)
Join Date: May 2009
Location: Walker,LA
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
The trucks is a Beast ....The truck is not perfect it needs 2 stepside bed sides or replaced with a fleetside bed.. a bed is like $400-$500...and just little things in the inside that need to be fix and cleaned ...I have a set of newer turn signals lights with all new led bulbs and 30K Blue Hid's for it......
Now for the Engine is built for Nitrous: Less then 1000 miles on Engine-
Futral MotorSports built the Engine for a guy it was a $10K build after the guy got the truck back he totaled it in a ditch so my friend bought the motor from him then he got Futral MotorSports or Thunder Racing to change out the little cam and put in a Thunder Racing Cam Package
230/236 .602/.608 112+4 LSA the cam card said that but the paper said .592/.602 and Patriot Gold Springs Kit: includes retainers,locks,shims,and seals and Comp Cams 5/16" pushrods 7.400"...
LS2 Lifter Guide Tray..GM LS6 MLS Head gasket GM LS1 Head bolt kit and Manley LS6 Timing chain kit and Pacesetter LongTube Headers and Pacesetter 3" Y-Pipe with a Borla XR-1 Sportsman Muffler...but the Engine it self already had work done to it like the bottom end is all ARP bolts and the 317 Heads have been reworked and LS7 lifters and has a 85mm Throttle Body,44LB Racetronix Injectors ,and it's still running a ported LQ9 intake and it still has a good Yank 3000 stall in it but the transmission tail-shaft is bad and The rear-end built with Less then 500miles on it has a Detroit True-Trac Differentials with 4.10 gears with adumTA Performance Products Rear End Cover with Engraved "Thunder Racing" Logo, dumand I have a full ZEX Nitrous Kit that goes with it but never been on this engine but on the 5.3 before this one O and the Tune on the truck is a little street tune it has more in it......and more stuff....
Now for the Engine is built for Nitrous: Less then 1000 miles on Engine-
Futral MotorSports built the Engine for a guy it was a $10K build after the guy got the truck back he totaled it in a ditch so my friend bought the motor from him then he got Futral MotorSports or Thunder Racing to change out the little cam and put in a Thunder Racing Cam Package
230/236 .602/.608 112+4 LSA the cam card said that but the paper said .592/.602 and Patriot Gold Springs Kit: includes retainers,locks,shims,and seals and Comp Cams 5/16" pushrods 7.400"...
LS2 Lifter Guide Tray..GM LS6 MLS Head gasket GM LS1 Head bolt kit and Manley LS6 Timing chain kit and Pacesetter LongTube Headers and Pacesetter 3" Y-Pipe with a Borla XR-1 Sportsman Muffler...but the Engine it self already had work done to it like the bottom end is all ARP bolts and the 317 Heads have been reworked and LS7 lifters and has a 85mm Throttle Body,44LB Racetronix Injectors ,and it's still running a ported LQ9 intake and it still has a good Yank 3000 stall in it but the transmission tail-shaft is bad and The rear-end built with Less then 500miles on it has a Detroit True-Trac Differentials with 4.10 gears with adumTA Performance Products Rear End Cover with Engraved "Thunder Racing" Logo, dumand I have a full ZEX Nitrous Kit that goes with it but never been on this engine but on the 5.3 before this one O and the Tune on the truck is a little street tune it has more in it......and more stuff....
Trending Topics
#10
Teching In
Thread Starter
iTrader: (1)
Join Date: May 2009
Location: Walker,LA
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
If anyone wants to buy it for $5500 this week coming up its yours if not I'm going to do a th350 trans swap in it and keep it or put a stock 4l60e then sale it.....LMK...Thanks
#11
On The Tree
iTrader: (6)
Join Date: Mar 2011
Location: 29 Palms
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
Let me know if you need a built th350. Good luck with the sale though.
https://ls1tech.com/forums/parts-cla...h350-swap.html
https://ls1tech.com/forums/parts-cla...h350-swap.html