pboxfun

iTrader: (2)

What do you guys think of these heads? Doe's anyone here use them? What kind of gain will I see with my current set up? There isn't much info on this site with these heads. I know their not LE or AI heads. I also already know they stopped making them. I can get them for a cheap price. Here are the flow charts. Please let me know what you guys think. Any help would be great.

http://i189.photobucket.com/albums/z...5-26161011.jpg

http://i189.photobucket.com/albums/z...5-26161022.jpg

Tony Shepherd

iTrader: (4)

Those are my old AFR's from back in 2003 ported by Port Pros. I recognize the flow sheets and my hand writing that is scratched out. Those are the old style AFR's. Decent heads but not as good as their newer design. I ran 9.80's on spray with them with a hydraulic cammed setup, stock ported intake, 58mm throttle body.

pboxfun

iTrader: (2)

lmao go figure someone on here actually used to own these same heads.

96TransAmboosted

iTrader: (8)

Im not sure what cheap is but for the right price i would run them, more so i could say i have Tony Shepherds old afr heads. plus there not bad heads at all just out dated.

95mysticta

iTrader: (4)

My LE cam is similar to yours and im running a set of ported afr 190 60cc heads. They flow 294/208 @ .600 to my best knowledge as i have no sheet to prove it. Numbers are in my sig with concervative tune and full emissions equip.

pboxfun

iTrader: (2)

What kind of 1/4 times are you running?

95mysticta

iTrader: (4)

Havent been yet but i expect a high 11 to low 12 pass if i can manage a good 60 ft. Should have some track results in the next month.