I need some good brakes
#1
Launching!
Thread Starter
iTrader: (2)
Join Date: Jul 2009
Location: neversink, ny
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
I need some good brakes
I'm looking to replace all four, and i've been doing some reading on the site for information but not getting any real definitive answers.
I'd like a good pad with little brake dust and no noise, it seems I always end up with noise somehow.
As far as the rotors, i've read a lot of the drilled and slotted are cheap rotors, so as far as blanks, what are some good ones that hopefully don't rust either?
Input would be great, thanks guys
I'd like a good pad with little brake dust and no noise, it seems I always end up with noise somehow.
As far as the rotors, i've read a lot of the drilled and slotted are cheap rotors, so as far as blanks, what are some good ones that hopefully don't rust either?
Input would be great, thanks guys
#2
TECH Fanatic
iTrader: (5)
Good pads that don't dust much are going to be hard to find. You can run ceramics, but they won't have as much bite as a good set of pads like Hawks. For rotors, I like ATE, but there are more than a few decent brands out there.
Might want to hit the Suspension forum, as there are a couple of good threads in there about brake pad and rotor choice.
Might want to hit the Suspension forum, as there are a couple of good threads in there about brake pad and rotor choice.