fastredlt1

I have a 95 formula and a 97 trans am. I would like to swap steering wheels, one has had controls and the other doesnt. Is this possible? also, will the hand controls work?

RamAir95TA

iTrader: (2)

The wheel will fit, but the controls won't work.

fastredlt1

Thats fine, the wheel is in better condition anyways. Is this a hard procedure, little scared about the airbag!

BizZzatch350

iTrader: (33)

No, it's easy so long as you have a steering wheel puller. Air bag is plug and play

96TransAmboosted

iTrader: (8)

Make sure you pull power before trying to remove air bag.

truekoa

iTrader: (21)

check this thread out: https://ls1tech.com/forums/appearanc...l-install.html

brvanwi

iTrader: (1)

some one correct me if i'm wrong but if the clockspring is swapped also then the controls will light and function assuming the stock head unit is being used.

truekoa

iTrader: (21)

the clockspring is for the air bag, the SIR coil is what you're referring to I think.

Paul Bell

iTrader: (9)

1995 and up steering wheels are the same. If the vehicle has the the UK3 radio buttons option, the wheel has the button pod. If not, they are blank.

The wheels will swap but the car without the option will not have anything for the buttons to plug into.

fastredlt1

I had just put the stock radio back in the car today. I just thought it was weird that a 97 WS-6 didnt have the controls on the wheel. The 95 formula has been sitting for about 6 months with no motor or power, so i should be good with taking that wheel off? So you are saying that if the car should be wired for the controls??

Paul Bell

iTrader: (9)

The radio buttons on the steering wheel might have been included in the WS6 package, but it could be had with any model including the base V6 car.