to squeeze or not to squeeze
#1
Staging Lane
Thread Starter
iTrader: (3)
Join Date: Aug 2008
Location: Connecticut
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
to squeeze or not to squeeze
First off thanks to G body and and all the others that helped me with my harness wireing.
To the question at hand, to lay some squeeze on my lq9 or not
1991 240sx
LQ9, wiesco 9.8:1 pistons, ported 317 heads, lingenfelter gt7 cam, callies rods, t56 built,
I have a 78mm turbo on this setup, not dynoed yet or tuned just got it running,
Question is what kind of shot can this setup hold if the turbo was not in the equation. Never played with n20 and kind of want to. Built many high hp turbo cars and I am curious of the n20. Id like to make 6-650 whp on my setup either way I go. Like I said new to n20 so any advice would be nice. Thanks guys
To the question at hand, to lay some squeeze on my lq9 or not
1991 240sx
LQ9, wiesco 9.8:1 pistons, ported 317 heads, lingenfelter gt7 cam, callies rods, t56 built,
I have a 78mm turbo on this setup, not dynoed yet or tuned just got it running,
Question is what kind of shot can this setup hold if the turbo was not in the equation. Never played with n20 and kind of want to. Built many high hp turbo cars and I am curious of the n20. Id like to make 6-650 whp on my setup either way I go. Like I said new to n20 so any advice would be nice. Thanks guys
#2
Guest
Posts: n/a
First off thanks to G body and and all the others that helped me with my harness wireing.
To the question at hand, to lay some squeeze on my lq9 or not
1991 240sx
LQ9, wiesco 9.8:1 pistons, ported 317 heads, lingenfelter gt7 cam, callies rods, t56 built,
I have a 78mm turbo on this setup, not dynoed yet or tuned just got it running,
Question is what kind of shot can this setup hold if the turbo was not in the equation. Never played with n20 and kind of want to. Built many high hp turbo cars and I am curious of the n20. Id like to make 6-650 whp on my setup either way I go. Like I said new to n20 so any advice would be nice. Thanks guys
To the question at hand, to lay some squeeze on my lq9 or not
1991 240sx
LQ9, wiesco 9.8:1 pistons, ported 317 heads, lingenfelter gt7 cam, callies rods, t56 built,
I have a 78mm turbo on this setup, not dynoed yet or tuned just got it running,
Question is what kind of shot can this setup hold if the turbo was not in the equation. Never played with n20 and kind of want to. Built many high hp turbo cars and I am curious of the n20. Id like to make 6-650 whp on my setup either way I go. Like I said new to n20 so any advice would be nice. Thanks guys
Just takes the right system, tuning, and some solid bottom end parts.