Gen 5 Camaro Racing Tech, Results - Launching at the strip!!!?????
08-15-2011, 11:58 AM
How many RPMS should I let the big dog eat at? Ive got a 2011 Cammed M6 SS,keep in mind I dont want to break anything.
08-15-2011, 05:09 PM
Best luck is practice at about 3K to 3.5K and use a quick clutch slip. Its a fine line between bog, spin and wheel hop. I was bone stock and used 3K and worked fairly well.
08-19-2011, 10:55 AM
3000 rpms on the road = tire haze even with Comp mode on, TC on = DOG...Im hoping less Tire Pressure sticky track = traction...lol I will find out tonight
08-19-2011, 02:58 PM
It is a very very fine line. On stock Pirelli's I had to burn the clutch out of the hole. That resulted in a 1.9 60'. With Nitto's I'm thinking between 3.5-4K. I ran a 1.8 60' in a friends cammed LS3 on a Nitto but I feel with more seat time a low 1.7-high 1.6 is possible.
08-20-2011, 11:44 AM
I tried slipping the clutch,this resulted in my clutch staying an inch off the floor for a 1/4 mile..Smoked it on that run,60' times were horrible 2.2s my best .
08-20-2011, 03:01 PM
There is also a real fine line between spinning and baking the clutch till it stick to the floor.
08-20-2011, 06:04 PM
It shifted great all the way down. it still works fine today,I've never had one do that I've slipped them worse than that. I need to upgrade it for a ProCharger,any suggestions?
vBulletin® v3.7.4, Copyright ©2000-2013, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO