Where to start?
08-21-2011, 10:27 PM
#1
Teching In
Thread Starter
Join Date: Sep 2010
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Where to start? I have a 99 stock T/A that i just put long tube headers, now idk what to do next, im thinkin about putting a cam in it, is it the right way to go??? and what kind??
08-22-2011, 08:06 AM
#3
Auto or Manual? What's the car doing most of the time? Is it a street/strip car? Autocross/roadracing? Drag car?
After modding two LS1 fbodies, I'm a fan of doing the suspension/driveline first before engine mods. Make the most of what you got now and then add power. If you have a 6 speed, think about how hard you are gonna beat on it. If it's gonna see a lot of drag time, I highly recommend getting a new rear end/driveshaft. If it's an auto, then get a stall (matched to what kind of mods you are planning to do). Then, there's so many different ways to go from here. It's all gonna come down to what you are using the car for .
After modding two LS1 fbodies, I'm a fan of doing the suspension/driveline first before engine mods. Make the most of what you got now and then add power. If you have a 6 speed, think about how hard you are gonna beat on it. If it's gonna see a lot of drag time, I highly recommend getting a new rear end/driveshaft. If it's an auto, then get a stall (matched to what kind of mods you are planning to do). Then, there's so many different ways to go from here. It's all gonna come down to what you are using the car for .
