Where to go from here??
#1
Staging Lane
Thread Starter
Join Date: Jun 2011
Location: New Tripoli, PA
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Where to go from here??
2000 Ws6 with Volant cold air intake. In the process of installing texas speed LT headers - 2 cutouts after heads - ORY - magnaflow cb - topped of with a tune from OE Tuning.
Input on Tune?
Next on my todo list, I want a mild cam.. Possibilities?? 228R? What other parts/mods are needed? Ls6 intake or should i just go with the FAST 90/90 setup??
Also what kind of HP am i looking at with what im putting on before the cam?
Thanks!
Input on Tune?
Next on my todo list, I want a mild cam.. Possibilities?? 228R? What other parts/mods are needed? Ls6 intake or should i just go with the FAST 90/90 setup??
Also what kind of HP am i looking at with what im putting on before the cam?
Thanks!
Last edited by RPM WS6; 08-24-2011 at 04:12 PM. Reason: Non-sponsor link removed
#2
TECH Fanatic
iTrader: (9)
Join Date: Mar 2004
Location: Pasadena Texas
Posts: 1,318
Likes: 0
Received 0 Likes
on
0 Posts
You already have a LS6 intake on the car. I'm guessing 320-330HP.
I would do some suspension work and help it handle and stick.
A small cam and some valve train upgrades would net you 15-25 HP.
If you have an auto do a stall convertor.
Save for a 12 bolt and do some gears.
I would do some suspension work and help it handle and stick.
A small cam and some valve train upgrades would net you 15-25 HP.
If you have an auto do a stall convertor.
Save for a 12 bolt and do some gears.