redbandit98

iTrader: (13)

sorry didnt know where to post this. Where do most of you guys tap into for a 12 volt source (switched). I plan on running my qtp cutout,and my switches for my nitrous. Also my bottle heater and purge if i can get a good deal on them. Just dont want to overload the circuit i tap into as i dont know how much power the cutout plate is going to pull.
thanks guys
Matt

OBTW if anyone has a bottle heater that will work with my tnt kit let me know..see my parts wanted add.

ChevyWeatherman

iTrader: (2)

I tapped into the pink ASR wire. My car does not have ASR but the wire is still there on non-ASR cars.

HumpinSS

iTrader: (1)

Or you could pull it out of the fuse box

bill99hawk

I tapped the power wire to the TCS button in the consol for a shift light that needed 12 volts.

cm02WS6

I also got it at the fuse box. If I remember correctly, there is a slot named IGN. You just put a flat connecter into it.