stall help
09-26-2011, 09:10 AM
#1
Teching In
Thread Starter
Join Date: Jul 2009
Location: Memphis TN
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
stall help i got a ms3 cam im thinking about going 4000 stall but will i be able to spray and im going 243 cnc ported heads do anybody have a ms3 cam and 4000 stall and spraying
09-26-2011, 03:50 PM
#3
Buddy of mine had the ms4 with a vigilante 4000. It blew through it a little... He ran 7.6s cam only full weight and on a 200 hit ran 6.7s IIRC.. Been a few years now.
I would recommend getting a converter for your setup... If not and you are going to buy an off the shelf, stick with a 3600.
I would recommend getting a converter for your setup... If not and you are going to buy an off the shelf, stick with a 3600.