kenny_hill33

18x10.5 in the rear with 295/35 Nitto Invo's
18x9.5 up front 275/35 Nitto Invo's

Hugger Z

iTrader: (4)

Looks good!

beyonddisturbed

iTrader: (5)

looks nice! any fitment issues?

kenny_hill33

Thanks. Had to use the hammer on the rear a little bit, wasn't bad at all though.

tomcamaro

Do you have any other photos of your car with different angles? I am thinking of going with the exact setup.. or may do the fronts 18x 8.5 or 9 instead of 9.5..anyone have photos similar or ideas ?

gto65lvr

iTrader: (8)

What is the backspacing on the wheels?

Atdc94

Nice man!

evilz99

iTrader: (74)

I'm in for mote pics to. I have almost the exact same car and am inbetween the c5 deep dish with rivets that looks like I set of iforged wheels. Or the wheels you have.

BOBS99SS

iTrader: (2)

Evilz go with c5dd with rivets,best looking cheap camaro wheels imo,looks good op

blackjack325

iTrader: (1)

not feelin the C6Z wheels.. id say the C5 Deep dish look better on F Bodies or the C5Z

FastFitters35th

I just installed the same rims on my car and I love them! Had the C5 polished and I liked them but wanted to go bigger so I went C6 chrome 17x9.5 up front with 275/40/17 and 18x10.5 DD out back with 315/30/18 Mickeys. The wall difference is somewhat noticeable from front to back but my tires on my previous setup were still good so I'm gonna use them up on the fronts at least and then go a thinner wall later. I don't have pics yet but ill try and get some up later. Your car looks great by the way!

Coppertone

Nice! How's the INVO's?

gto65lvr

iTrader: (8)

I did the OEM wheels with the proper offset for F Body 11's in the back and 9 or 9.5 in the front. Ran 295 and 245 invos to keep the height about the same for the ABS.

I really like the invo's myself!!