Trans maTching
#1
On The Tree
Thread Starter
Join Date: Sep 2011
Location: dayton ohio
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Trans maTching
I am building a 2001 5.3 out of a truck and need to know if the 350 turbo will bolt up but if not what will bolt to the engine
what other parts will need to be changed as well
by the way......i am punching the 5.3 to fit a standard 5.7 ls1 crank, rods and stk 10.5:1 pistons
is their a special flex plate to fit the crank as well
dave
what other parts will need to be changed as well
by the way......i am punching the 5.3 to fit a standard 5.7 ls1 crank, rods and stk 10.5:1 pistons
is their a special flex plate to fit the crank as well
dave
Last edited by lemkerailroad; 10-01-2011 at 10:09 AM.
#4
On The Tree
Thread Starter
Join Date: Sep 2011
Location: dayton ohio
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
does it have to be from a 2500 hd or would a flex plate out of a workhorse truck with a 6.0 work......
Great work on the install
dave