Chevrolet Performance LSX Challenge Series and LSX Shootout - Join Team BMR at LSX Shootout!!
BMR Tech2
10-01-2011, 10:54 AM
Benefits:
BMR Suspension will pay half of the racer's entry fee for the NMCA LSX Shootout. Racer's can purchase BMR products for 25% Off and Free Shipping until October 31, 2011.
Requirements:
Race vehicle must display the large BMR decal (18" x 12") on the back window, rear quarter panel, or door panel for the entire event. Race vehicle must have at least 1 BMR Suspension product installed on the car. Race vehicle cannot display decals from other suspension manufacturers.
Here's How It Works:
After you get to the event, stop by the BMR Trailer and we will give you a decal to display. After the decal is on the window, come back to the BMR Trailer and collect your cash. If you are interested in purchasing product, we can take your order (and credit card info) at the track and ship your parts for free within a few days after the race.
Ordering BMR Parts Before the Race:
Place your order like normal and pay the regular price including shipping. You can place your order online or call a BMR Sales Tech, but you must order directly from BMR. Stop by the BMR Trailer at the event and join Team BMR. After the event, we will refund your credit card for 25% of the retail price plus the shipping price. Already ordered your parts? That’s ok. We’ll make this offer retroactive to any BMR product ordered since August 1, 2011. This offer applies to BMR product only.
Ordering BMR Parts After the Race:
Stop by the BMR Trailer at the event and join Team BMR. After the event, call BMR directly and order your parts. Let the Sales Tech know that you were a Team BMR member and he will apply the 25% discount and free shipping to your order. Remember, you must have at least 1 BMR Suspension product on your car at the event to join Team BMR.
BMR Dealers:
You can participate, too. You must follow the same requirements as the other racers. You can purchase product for an additional 10% off of your normal discount. Free Shipping also!! However, the product must be installed on your shop vehicle and must remain there for the rest of the race season. This must be the same shop vehicle that is being raced at this event.
MIGHTYMOUSE
10-01-2011, 02:06 PM
this one?
http://image.gmhightechperformance.com/f/30211676+w750+st0/1103gmhtp_25_o+lsx_shootout_iv_st_louis+trans_am_s ide.jpg
Fonzi383
10-02-2011, 03:54 PM
Thanks sticker still on from ls fest
ls1excitement
10-02-2011, 06:19 PM
Thanks it helps out a lot.
Cheeks
10-02-2011, 09:34 PM
thank you, this definitely helps. Will stop by when I get there, will you guys be there thursday?
Fbodyjunkie06
10-02-2011, 09:38 PM
this one?
http://image.gmhightechperformance.com/f/30211676+w750+st0/1103gmhtp_25_o+lsx_shootout_iv_st_louis+trans_am_s ide.jpg
LMAO!!!
You should post that up the next time someone thinks they have you "covered".
98 StealthZ
10-03-2011, 04:33 AM
Count me in boys, I am there...
dnkynrbk
10-03-2011, 02:50 PM
I'm there count me in see you there.
FSTR-THANU
10-03-2011, 09:48 PM
That is awesome!! Hats off to BMR for showing their customer support!
Tom
Nice4thgenZ
10-04-2011, 08:03 PM
Count me in
ZTwentyAteU
10-07-2011, 12:29 AM
maybe mine will make it over this time before it blows up haha
Camaro_94
10-07-2011, 12:37 AM
I'm going to stop by the booth tomorrow.
BMR Tech2
10-07-2011, 07:57 AM
See everyone out there!
98 StealthZ
10-11-2011, 02:41 AM
Hey Kevin, I just wanted to say thanks again.... I think it is awesome that you guys helped out the way you did... I will represent for a long time
BMR Sales2
10-11-2011, 08:07 AM
It was good meeting everyone and talking with them, I spent pretty much all day Friday running around the pits and talking to customers. We put a ton of decals on and handed out a bunch of money to help out the BMR racers.
Everyone doing the team BMR sponsorship deal can purchase parts through the end of October for 25% off and free shipping. Make sure you give me a call and I will make sure you guys get taken care of. BMR would like to thank all the racers and we are very excited to see what next season has in store.
Kyle
Cheeks
10-11-2011, 08:27 AM
It was good meeting everyone and talking with them, I spent pretty much all day Friday running around the pits and talking to customers. We put a ton of decals on and handed out a bunch of money to help out the BMR racers.
Everyone doing the team BMR sponsorship deal can purchase parts through the end of October for 25% off and free shipping. Make sure you give me a call and I will make sure you guys get taken care of. BMR would like to thank all the racers and we are very excited to see what next season has in store.
Kyle
thats awesome, thanks again for everything you did, that money helped immensely!!
BMR Sales2
10-11-2011, 08:29 AM
thats awesome, thanks again for everything you did, that money helped immensely!!
No problem, we try to do everything we can to help out our customers. We know every little bit helps.
blue99fbody
10-11-2011, 10:58 AM
thanks again bmr!
Double-L
10-11-2011, 02:05 PM
It was good meeting everyone and talking with them, I spent pretty much all day Friday running around the pits and talking to customers. We put a ton of decals on and handed out a bunch of money to help out the BMR racers.
Everyone doing the team BMR sponsorship deal can purchase parts through the end of October for 25% off and free shipping. Make sure you give me a call and I will make sure you guys get taken care of. BMR would like to thank all the racers and we are very excited to see what next season has in store.
Kyle
I couldn't make it but the friend that drove my yellow 04 SSR Said you was a super guy to talk to, He told you we bent a Moser pro stock rear end and your control arms held, I wouldn't run without them, Was runner up in the fastest truck, Funny got beat by a El Camino that never made a run, I made my three back to back?
BMR Sales2
10-11-2011, 03:55 PM
I couldn't make it but the friend that drove my yellow 04 SSR Said you was a super guy to talk to, He told you we bent a Moser pro stock rear end and your control arms held, I wouldn't run without them, Was runner up in the fastest truck, Funny got beat by a El Camino that never made a run, I made my three back to back?
Your SSR is by far one of the coolest ones I have ever seen and it rides out. Definitely one unique and cool vehicle. If you can post some pictures of it, I would like to have a couple to keep in our Customer database.
Double-L
10-12-2011, 11:28 AM
I can find some pictures, Here is a couple videos, One getting ready for the LSx shoot out and the other at the LSx shoot out
http://www.youtube.com/watch?v=-IgWesMX8u4
http://www.youtube.com/watch?v=Fh6Sg0tyrqM&feature=feedlik
BMR Tech2
10-12-2011, 11:39 AM
Nice! Yeah, that was one of the coolest SSRs we have ever seen! Keep it up.
Double-L
10-12-2011, 02:06 PM
Here is a picture from the meet, Runs 11 pounds of boost and pump gas, 4480 pound daily driver
bgblockelcamino
10-12-2011, 02:18 PM
I couldn't make it but the friend that drove my yellow 04 SSR Said you was a super guy to talk to, He told you we bent a Moser pro stock rear end and your control arms held, I wouldn't run without them, Was runner up in the fastest truck, Funny got beat by a El Camino that never made a run, I made my three back to back?
that would be me, first time i broke all year with all the passes it made. broke on 2nd qualifying pass would have been 6th pass that weekend. even made it to all the lsx series challenge events. certainly didn't expect to blow the rear end considering the motor has well over 260k on it now. Time to build stronger and better for next year
Double-L
10-12-2011, 03:15 PM
that would be me, first time i broke all year with all the passes it made. broke on 2nd qualifying pass would have been 6th pass that weekend. even made it to all the lsx series challenge events. certainly didn't expect to blow the rear end considering the motor has well over 260k on it now. Time to build stronger and better for next year
You don't have a Moser do you, I got one run out of one there best before it bent, My o2 was bad and didn't have the laptop, That is why the SSR wasn't running very good, Take care and better luck to you
bgblockelcamino
10-12-2011, 03:22 PM
wasn't my best pass either i have moser axles i was the guy who shot the pinion out of the rear end on the starting line. i was planning on jetting up after that pass wanted to make one more pass on 100 shot then bump up. i was figuring it was gonna take at least a 9.6 to win fastest truck. but none of the heavy hitters from texas showed up this year. BTW the SSR you have is badass was checking it out. glad to see someone actually abuse theirs lol.
MIGHTYMOUSE
10-12-2011, 05:07 PM
thanks bmr! see sig update!
http://px6.streetfire.net/0002/95/74/2035947_600.jpg
BMR Tech2
10-13-2011, 08:52 AM
Seriously cool! Thank for you support. Your car is killer.
thanks bmr! see sig update!
http://px6.streetfire.net/0002/95/74/2035947_600.jpg
Nice4thgenZ
10-13-2011, 07:40 PM
BMR in the winner circle for rumble
http://img.photobucket.com/albums/v72/nice4thgenz/3e05375f.jpg