Anybody work in the oil fields in texas?
#1
Anybody work in the oil fields in texas?
I'm considering a roustabout/roughneck/drillhand job .. been itching to talk to a recruiter.
Anyone know what a typical day is like? Pay range?
Or anything to consider, thx
I know its hard labor, but I've done that type of work before, so it doesnt bother me
they said to post here so i thought id give it a shot
I applied already and i'll see if they call
Anyone know what a typical day is like? Pay range?
Or anything to consider, thx
I know its hard labor, but I've done that type of work before, so it doesnt bother me
they said to post here so i thought id give it a shot
I applied already and i'll see if they call
#2
TECH Apprentice
iTrader: (1)
Join Date: May 2009
Location: San Antonio Tejas, TX
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
I deliver Material to them, and usually I see those guys and the occasional woman drenched in sweat and tired. It makes me feel bad as I just have to engage the PTO and wait for my trailer to dump. But lots of companies are hiring down south. You got EOG Resources (I would mostly Recomend) Pinnacle, Pioneer, and some other that its kinda hard to pronounce.
#4
Teching In
iTrader: (15)
Join Date: Nov 2009
Location: Kemah, TX
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
I would try checking out rigzone.com they post a lot of jobs up on there. I am actually out on a rig now, but I work for a directional company so I get to sit behind a computer most of the night. Haha.
#5
TECH Junkie
iTrader: (2)
My father-in-law is a consultant. He manages/coordinates well work-overs....aka...sits in his truck and tells people what to do and when to do it.
I don't believe the pay is that high for a roughneck, but they can make some pretty good money when overtime comes into play.
I don't believe the pay is that high for a roughneck, but they can make some pretty good money when overtime comes into play.
#6
we normally work twelves. Roughnecks for most rigs go upwards of 15an hour. check out nabors drilling and H&P drilling they seem to always be looking for hands or rig zone is also good. I'm sitting on a rig right now lol
Trending Topics
#8
Teching In
iTrader: (2)
Join Date: Jan 2007
Location: FRIENDSWOOD, TX
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
My brother started out as a hand snubbing live wells. He has been doing it for about 3-4 years. Now he has his own team and makes close to 80K a year plus a company truck and fuel card. he just turned 22. it's very hard work but if you know what you are doing you can make some big money fast. Like I said start out snubbing you will learn more doing that than anything and it will help you promote faster.
#9
Teching In
iTrader: (2)
Join Date: Jan 2009
Location: victoria tx
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
i have worked on rigs for 18 years it pays great and i love it im working in California as a consultant for Chevron. look at H&P first then Nabors there is a little co in houston called Nicklos drilling i was a driller/toolpusher for them for 7.5 years good place to work goog luck
#11
you ask "is there anything that sucks" well oil base mud sucks and cleaning tanks sucks not being home sucks heat sucks a 38inch pipe wrench sucks. but the money is good hell I would pm the chevron consultant he knows where the money is. lol
#13
TECH Enthusiast
Join Date: Jan 2010
Location: Corpus Christi, TX
Posts: 695
Likes: 0
Received 0 Likes
on
0 Posts
THere are alot of compnies in our area like Haliburton and CJ energy and Trican that you can do FRAC and Coil tubing... that is where most of the people i know go
#14
TECH Apprentice
iTrader: (1)
Join Date: May 2009
Location: San Antonio Tejas, TX
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
Frac Sand hauling is where the money is at. Every time I pick up a load I see North of 500 for a 120 Mile delivery. As being the chatter mouth that I am, Pneumatic tank drivers are making 1-2grand PER DAY being company drivers they get 20-25percent commission (or so they say) I sorta believe them a good friend of mine got rid of most of his dump equipment, and is replacing them with used pneumatic trailer and decent road trucks. I would jump over but I don't like driving long distance's + lots of waiting time, and the blower kit runs you 10 grand. And its constant maintenance as that sand tends to clog the blower impellers.
#15
Launching!
iTrader: (8)
Join Date: Dec 2006
Location: Humble, TX
Posts: 284
Likes: 0
Received 0 Likes
on
0 Posts
I've ran pneumatic trailers before, but I'm not a truck owner. If you know of a place here locally that's hiring for that, let me know. Been looking at getting into hauling vac tanks or frac tanks as well. Going to talk to a company in the morning actually
#16
Launching!
iTrader: (2)
Join Date: Sep 2005
Location: Houston
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
I believe H&P and Precision Drilling are both hiring for Eagle Ford rigs. I 'heard' Ensco is hiring for offshore, but haven't personally confirmed it.
The crews typically work 12 hour shifts 2 weeks on, 2 weeks off. The starting pay is 15-16/hr for a roustabout, then can move up fairly quickly, especially in the current drilling climate. Roughnecks can make some decent money once all the overtime starts adding up.
The crews typically work 12 hour shifts 2 weeks on, 2 weeks off. The starting pay is 15-16/hr for a roustabout, then can move up fairly quickly, especially in the current drilling climate. Roughnecks can make some decent money once all the overtime starts adding up.
#18
Launching!
iTrader: (2)
Join Date: Sep 2005
Location: Houston
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
Nope. I'm not sure if there's any company that pays rig crews any salary (I'm not an expert on the matter, I work for a service company). You do make bonuses if the well is drilled ahead of schedule though (the amount depends on the operator).
#20
TECH Apprentice
iTrader: (1)
Join Date: May 2009
Location: San Antonio Tejas, TX
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
.
Although the gravy train should end as, U.P. and some other rail companies are building railways and rail yards to bring the delivery costs down. After that, I would imagine they'd pick up the frac sand at the rail yards, Theres one in Hondo, and a few towards the east.