1999 z28 roller MISC parts trades welcome
10-25-2011, 10:08 PM
#1
1999 z28 roller MISC parts trades welcome Category: Wheels & Tires
Price: $2000
Part Fits: 93-02 Chevrolet Camaro
Location (State): AR
Item Condition: Used
Shipping Information: Item Can be Shipped
LS Engine?: Fits LS Engine
1999 Z28 roller for sale. The body is strait with only a few tiny dings. I'm selling the car as a roller with a set of stock s10 wheels but I also have 2 sets of real GM ZR1 17x9" wheels. 4 of the wheels are glossy and very clean. The other 4 look like they were prepped to be painted and only one of the 8 has a small spot of rash on the lip. The interior is ebony and the door panels are very clean but look scratched in the pics but that is just dust. The dash has a couple of small spider cracks above the radio, no radio and no console lid. The driver seat is cut up from the previous owners ex-wife but the passenger set and rear seats are tear free from what I can tell. The rear end has 3.42 gears but the car was an automatic that was being swapped to a standard. It has a standard column but an automatic console and shifter. Car is located in Scott in central Arkansas. It also has a walbro fuel pump installed. All prices are plus shipping. The car has a rebuilt title.
1999 z28 roller-$1700 (with BMR kmember ZR1 wheels, Edelbrock tq arm)
clean ZR1 wheel set-$300-SOLD
paintable ZR1 wheel set-$200
SLP stainless catback (looks very new)-$250-SOLD
Edelbrock non-adjustable tq arm-$100
3 guage clusters (2 150mph, 1 120mph)-$20 each
AC controls-$10
LS1 oil pan-$150-SOLD
LS1 harness-$150-SOLD
LS1 harness-$150-SOLD
LS1 ECM-$150-SOLD
LS1 crank-$50
clean NBM spoiler-$25
left and right tail lights -$20 each-SOLD
stock camaro radio-$25
Kenwood coaxial door speakers in the install pods-$50-SOLD
LS1 PS pump with billet pulley-$50-SOLD
Complete LS1 front and rear brakes (calipers rotors)-$100-SOLD
Complete LS1 rack and pinion setup-$75
Last edited by ss454327; 11-28-2011 at 09:11 PM.
10-28-2011, 05:29 PM
#7
Also have a set of 1 5/8" Sanderson s10 LSX swap headers. They will probably fit many different swaps since the s10 is one of the tightest swaps to do. They are brand new and have only been dry fitted for testing.
Last edited by ss454327; 10-28-2011 at 06:19 PM.
Trending Topics
10-31-2011, 09:25 PM
#10
Wire harness is sold pending funds. I still have lots of parts and a roller to sell. I also have a complete set of brakes with slotted front rotors and all the calipers and a mildly damaged kmember that has a working steering setup still attached. I also have a stock aluminum driveshaft.
11-01-2011, 08:12 PM
#13
I'm not sure if I'm going to start parting the interior on this out yet or not. It's going to be much harder to sell the roller with no interior in it. I might end up going that route and turning the car into a light weight racer though...
11-09-2011, 03:22 PM
#17
I'm willing to take trades on anything I have here. I'm looking for the following parts...
Yank SS4000 OR Circle D 5C 4k converter
FAST intake/tb (would prefer the LSXrt) or Edelbrock proflo xt intake/tb
heads with dual springs and MS3 or bigger cam (prefer not to flycut)
BRP 1996 s10 1 3/4 lt headers (a long shot here)
Yank SS4000 OR Circle D 5C 4k converter
FAST intake/tb (would prefer the LSXrt) or Edelbrock proflo xt intake/tb
heads with dual springs and MS3 or bigger cam (prefer not to flycut)
BRP 1996 s10 1 3/4 lt headers (a long shot here)
11-17-2011, 10:48 AM
#20
TECH Regular
iTrader: (10)
Join Date: Nov 2001
Location: La Vernia, TX
Posts: 447
Likes: 0
Received 0 Likes
on
0 Posts
Brakes Thanks,
Josh