charlie6178

iTrader: (1)

Year: 1988
Make: Chevrolet
Model: Camaro
Price: $5600
Mileage: 96000
Private or Dealer Listing: Private Listing
Location (State): OR
Color: Red
Transmission: Manual
Drivetrain: Rear Wheel Drive

i have a 1988 camaro that is very tastefully built that i'm interested in selling. i am the 3rd owner of the car. this car is not stock. this car is built the right way with all of the right parts to make it perform outstanding in all walks of motorsports. this car is very reliable, and driveable. this is not a full out racecar. virutally every corner of this car has been improved from stock, to compete with the new muscle cars with ease. i am not in a position that i need to sell the car, but i am considering buying a different platform to build off of. this car should be somewhere around 350-370rwhp and 380-390rwtq as it sits. when the car had a bone stock LT1 in it we took it to PIR on street tires it was running 12.90's at 108mph. since then it has had alot of work done to the engine. it'll run mid to low 12's how it sits depending on the skill, and experience of the driver. this is a very nice, and very solid camaro! this is a very light car. it weighs 3070lbs as it sits. it has manual windows, manual locks, factory no a/c car, etc.

engine:

LT1 4 bolt corvette engine
374 casting aluminum angle plug heads (with monor port work) milled .030"
comp behive springs
comp retainers
comp valve locks
viton valve stem seals
3 angle valve grind
224/230 .503/.510 112 LSA comp camshaft
GMPP LS7 lifters
comp cams pushrods
ARP head bolts
all new felpro gaskets
SLP air foil
brand new Optispark distributor
new GM ICM & coil
NGK plugs / MSD wires

Transmission:

Tremec TKO 5 speed
mcleod scatter sheild
mcleod clutch
custom chromoly driveline
driveline saftey loop
custom stainless / billet shifter

Exhaust:

Edelbrock coated mid length headers
Edelbrock offroad Y pipe
magnaflow highflow cat
3" Flowmast cat back

Brakes:

Baer 13" front 12" rear track kit
carbotech race pads

Suspension:

Global West sway bars front & rear
new adjustable struts / shocks
1LE springs cut, bent, and scaled
adjustable panhard rod
adjustable LCA's
LCA relocation brackets
3.42 rear end gears
auburn posi
ACR close ratio steering box
Hotchis strut tower brace
steering angle kit
bump steer kit

Interior:

4 Point custom roll bar w/removable harness bar
Momo corse fixed back racing seats
schroth racing 4 point street harness system

Exterior:

2"harwood bolt on cowl induction hood
brand new GM Z28 grill
fresh tinted 20% windows
Factory GM ronal 16x9 GTA wheels

this car is in VERY good shape compared to 90% of the rest of the 3rd generation camaro's around. this car is a blast to drive, and everything on this car works! all of the factory gauges, all of the lights, heater controlls etc.. even the emissions and air pump is still all in working order. this car is a driver, this car was built to be driven, it's not a show car. it's a weekend warrior car. the paint isn't 100% spotless, but it is in VERY nice shape for being mostly factory paint from 1988. the interior is very nice aswell. this car is a very functional car. i would not hesitiate to jump in this car and head across country.

with all of that said i believe that it's a whole lot of car for $5600. would cost well over $10,000 in parts alone to replace this car. the car is very fun to drive, and gets tons of looks and compliments anywhere you take it!

I have tons of pics / receipts / invoices for alot of the work done to the car, and pics as it was being done. there is nothing hidden on this car. this is as solid as it gets! i'm sure there is a ton of stuff i have left out, and or forgotten about. if you are interested, i'm more than happy to talk with you about it, and tell you more about the car.

trades are possible too. i'm into alot of different things. i wouldn't be opposed to trading up, down, or straight across.

please make offers or questions out to charlie617p at hotmail.com

or give me a call or text 503-866-1711



the price at $5600 is for the car with GTA BBS style crosslace wheels, NOT the HRE forged wheels, but they can be sold with the car for an additional $1400

flyin

iTrader: (4)

I like it!! GLWS

charlie6178

iTrader: (1)

thank you! it's a very nice car.

bump.

charlie6178

iTrader: (1)

Bump...

charlie6178

iTrader: (1)

price drop $5000

Joey D

iTrader: (4)

car looks great for 5000...if you werent across the country id come give you cash