Drag Racing Results - pittsburgh raceway nov5th guess my et!

me and a few guys are going to prp this sat anyone wana guess my times?i have a 2000 ws6 transam m6 ,mods are: forged 383 stroker afr 205s milled to 62cc 234/242 598/609 112 11:3 to 1 comp,fast 90 combo, fast fuel rails,sv0 42lb inj,racetronix kit w/hotwire,hpt sd street tune,ftp 98mm lid,tick level 2 t56 with ram vds clutch,adj master,steel flywheel,pro 5.0 w/short stick,hooker 1 3/4 LT,tsp y pipe with hollowed out cats,hooker CB,stock 342's 10 bolt,stock ws6 wheels with bfg drag radials 275's,bmr sfc,umi tunnel mount t/a,lcas,panhard rod,stb,and a 100 wet shot cold fusion nitrous!oh and a/c delete,tc,egr,abs,spare tire and jack removed and back seats.;)

nobody????wtf come on now!!

the 10 bolt & drag radials are going to be your enemy. with a good rear & good tires, if it don't go 10's on spray, something is wrong.

yeah i know about the 10 bolt, i broke one already, but im gona launch around 2000 rpm and wait til im rollin before i hit the nitrous it should be ok!

I am hoping to make it up there on saturday also. But im just jay... 10s if you dont break something.

ahh haha ill prob be there im always in pitt

11.38@127 on gas and 12.10@116 on motor.....just a geuss

11.8@122 on motor

thanks guys ill post up times and video when i get back home im hopin for mid low 11s with the 10 bolt and drag radials.

Go somewhat easy on the launch but give it hell down the track. Shift like nobody's business. It may hold a 1.5-1.6 60 foot, i know my buddy's 94 bird did with stock 10 bolt and T56 and he went 11.0's at 127 all motor. They can live but be gentle :)

383 with AFR's should easily make 450whp and likely more so I'd say 11.3's at 120 on motor if you drive it hard. If the 60's are soft and in the 1.7-1.8 range, then 11.6-11.7's at 120mph