Drag Racing Results - new best 9.62 @ 144 6 Speed Spinning.. Some amature Video as well

Got to track today with intent on spraying again.. First and second pas spun horribly again which you will see in Vid..
Dropped Tires to 12 and launch RPM down to 5500 to semi hook, But got some good passes and new best..
3RD,4TH and 5TH passes:
9.67 @ 143, 1.47 60ft spinning..
9.68 @ 144, 1.50 60ft spinning more..
Uncapped headers and ran new best of
9.62 @ 144, 1.47 60ft again and spinning.. Has 9.4s in her no doubt, just need to get hook and RPMs back up on launch..
The slicks are shot, better times to be had.. This winter will see a drag bar and rear adjustables probably.. Maybe more spray.. Still using single spec 3 clutch

Spinning bad 1st and second
http://youtu.be/fetgnMYGQJE

9.68 and VERY amature video, sorry..
http://youtu.be/z160OAjDeGs

And new best 9.62 and slightly less amature vid.
http://youtu.be/Ii0Hcqhe8gc
__________________

Gotta love a 9 sec stick car! AND without an LS motor!!

None the less dude has 23* heads. Killin it on the 1-2 shift.

Baaaad Ass!!!!

Slam them gears

nice tommy. haven't had chance to see the car at all this year.

Iam in love very cool setup and awesome times

very nice. ima be shooting for the 9.6x's this weekend as well. love a fast 6 speed

Looks like Pittsburgh Raceway.:nod:

very nice. ima be shooting for the 9.6x's this weekend as well. love a fast 6 speed

Good luck to you! Thanks for the compliments guys, been a long road getting it here.. Still more in it, currently installing comp universal drag bar - need adjustable rear shocks to lessen hit on tires as well.

nice tommy. haven't had chance to see the car at all this year.

Hi Jeff! Have not seen you forever! Your car is flying too!

thanks, been a fun year with it. gotta catch up some time see how the car is doing.

nice!!!!

Wow nice driving! Hows the stock T56 holding up for ya? I had mine break at the track with only bolt-on LT1 power and drag radials...

Looks like Pittsburgh Raceway.:nod:

You are correct:nod: You go there much? Don't recall seing your car..3

Coolmanvette: Sig needs updated, it has been faceplated by liberty - got tired of blowing third gear syncros.. Other than those it has held well, all stock parts yet.. Though regretting my decision to not go 31 spline tail shaft for peace of mind.

You are correct:nod: You go there much? Don't recall seing your car..3

Coolmanvette: Sig needs updated, it has been faceplated by liberty - got tired of blowing third gear syncros.. Other than those it has held well, all stock parts yet.. Though regretting my decision to not go 31 spline tail shaft for peace of mind.

Made it there once this year. I need to get re-tuned and new slicks, should be a good year next year. I also got my trans. faceplated by Liberty and love it.

Nice times.