10 Second Club - lq4 swapped lexus runs a 10.94

Hey guys my project that i started this time last year, with a Lexus SC300 and a junk yard 6.0.

we put a 135 wet shot to it and ran a 10.94 @ 124 mph

Congrats, that's bad ass! Any more details on the setup? Manual or Auto? What was the 1/8 mile and 60'? Pics/Vids?

Took it to MIR this weekend, last race of the season. About a year and 2 months since i started the build.

There were alot of 2jz cars there from puerto rico, they had to cancel the last 2 rounds of heads up and 2 rounds of bracket et races because sooo many cars broke i think the count was at 65 when i left because it got to late.

Ran a motor pass and ran a 12.68 @ 114 just like home
so we turned on the spray

We put the SC in the 12.50 index. ran a 11.43@117 (50 shot)

so we put it in the 11.50 index.
in my first 11.50 race i ran an 11.10 @119 (100 Shot) and got bumped out (i was just running for times)
so i got put into et bracket racing and wrote 10.89 on my window cranked up the spray 10 a 150 shot and ran a 10.94@ 122 (135ish shot) worked with what jets we had.

10s for less than 10K ya boy.

videos and pictures soon to come


LQ4 bottom end
318 (esclade) heads cuz we drivin a lexus and we cant have silverado heads
LS6 Intake,
1 3/4 fbody longtube headers, with dumps
4L80e tranny with STOCK CONVERTER
Welded STOCK diff
Stock axles
Supra springs w/ koni shocks
140 ish shot of spray ( worked with what jets we had all i wanted was a 75 shot)
NX nitrous kit.
Spectra chevy tahoe cold air intake kit
Tuned by ed at: PCMs for less

http://pic40.picturetrail.com/VOL264/11344823/23587232/399375661.jpg

http://pic40.picturetrail.com/VOL264/11344823/23587232/399375662.jpg

http://pic40.picturetrail.com/VOL264/11344823/23587232/399375663.jpg

http://pic40.picturetrail.com/VOL264/11344823/23587232/399375667.jpg

http://pic40.picturetrail.com/VOL264/11344823/23587232/399375668.jpg

11.1
http://pic40.picturetrail.com/VOL264/11344823/23587232/399375665.jpg

10.94
http://pic40.picturetrail.com/VOL264/11344823/23587232/399375670.jpg

congrats sean the car was scootin all weekend

congrats on the times, and sweet project!

This is awesome! I am Looking to do a similar setup. Im new at this, quick question, what should i look for in a junkyard 6.0 thats bad and good? I know a 2001 and up

Congrats!

Im using a motor and tranny out of a 2000 silverado 2500 that was used to haul catering supplies

oh and that reminds me, NX.. the solenoids im using are about 5 years old, they were sitting in my buddys basement. they are both leaking a bit. Where do i get a rebuild kit for these

congrats bro time to build her up and run some 9s

Wouldn't it make more sense to put 243 heads on that block?

worked with what i had, the exhaust side is ported

Awesome results! Congrats!

Wouldn't it make more sense to put 243 heads on that block?

Why? If he were to buy better heads, might as well go with set of L92s.

317s and 243s have identical ports, 243s are just higher compression.

Congrats Sean.

more compression seems like good logic...