Dyno Guesses & Bench Racing Forum - 355 h/c/i/g 6speed guess ?

96 z28 camaro , 6 speed . I have no clue what she would run @ my local strip , nor do I know exact HP ? I am guessing around 400-410hp to the wheels maybe a tad less .

Here are the current mods , just idea of what I might look forward to or close hp ?


True LT4
Borded .30 over ( By Blaine's Auto in Mechanicsville, Va )
Port and Polished Heads and intake
Speed Pro Forged rotating assembly
63-08-468-8 Comp Cams XFI Camshaft, 242 / 248, .584 / .579 113 LSA
Hooker Long Tube Headers
Valve Springs good up to .625 Lift ( came with cam kit )
Retainers and locks ( cam kit )
Port and Polished Twin 58mm TB
GMPP/LT4 1.6 roller rockers ( has bowtie on them )
Tuned By PCMforLess.com
Ypipe connected to a flowmaster 80 series

Drivetrain: Borg Warner T-56 , Spec 2 Stage 2 clutch kit , Richmond 410 gears

Stock suspension and running on some crappy tires , if I were on some slicks or drag radials ?

Who did the heads? I'm gonna guess 390 wheel.

Blaines Auto In Va same ppl who bored it out

Blaines Auto In Va same ppl who bored it out

Is your name Jim swain by chance? I know a couple guys with that name here in Ohio.

THe heads I had on my LT1 were Lyod Elliot stage 3 and a custom cam from him with full bolt ons and a ported intake. It laid down 433 through a 5 speed.

Is your name Jim swain by chance? I know a couple guys with that name here in Ohio.

THe heads I had on my LT1 were Lyod Elliot stage 3 and a custom cam from him with full bolt ons and a ported intake. It laid down 433 through a 5 speed.

No its john swain lol .. I would like to see 400 rwhp

TTT , I would like some input because I would like to know if I would lose this race or not lol .

This is all up to you, driver can get this set up with good tires to run 11.50 or not break out of 13's.

Is this a street car?! That cam looks WAY too big for your setup, thats more of a stroker cam. Your gonna have to rev the shit out of your engine to make any power. With the correct cam, 400 rwhp shouldn't be much of an issue

Ya its a street car , I heard this cam was good for this setup :/ Well it does lay some rubber and will get up pretty quick . if I change cam , I am not sure what set up to use .