Drag Racing Results - Typical H/C Junk

Its winter time so might as well let the cat out of the bag, nothing special anyways but I was pleased with how it ran for what it is. Drove it to and from the track. Basic rundown

LS2 shortblock, stock rods, pistons, crank
235/243 .621”/.624” 110LSA +2
ETP 5.3 heads
LS6 intake
Bolt-ons
stock catback with cutout
4L60E with a SS4000
8.8 rear with 3.73s and a 28" radial
3650+lbs


http://i5.photobucket.com/albums/y153/rodneysk8/photo1.jpg

Very good times for a heavy car. My cam is very similar to yours cept I've got stock heads

What torque number did it make on the dyno? Runs stout for the weight for sure, congrats

cutout open and closed.

http://i5.photobucket.com/albums/y153/rodneysk8/photo2.jpg

0_0 huge difference.

0_0 huge difference.

stock catback is a little restrictive but it helps keep the car very quiet while driving around my neighborhood.