Corvette Performance - Bolt-On C6Z 10.04 @ 137.44

Great weather at MIR yesterday. We switched a couple things up. Here are a two timeslips.
1.552---4.301---6.562---108.50---8.499---10.128---138.16
1.450---4.181---6.458---107.39---8.409---10.046---137.44
We may have figured out the last few items that need attention.

Wow!!! That is one fast Z. You're faster than any of the cammed Z06s I've seen. Gotta luv MIR when the weather gets good around here.

Care to share some of the things you have done? I've ran a 10.949 with my bolt on 08 C6. Don't know what else to take out and be able to maintain what I feel is a nice car. I did have the front seat out, light battery, front roll bar off and maybe a couple more items. Need more to reach my goal of a 10.80.

Wow!!! That is one fast Z. You're faster than any of the cammed Z06s I've seen. Gotta luv MIR when the weather gets good around here.
Thanks.
Care to share some of the things you have done? I've ran a 10.949 with my bolt on 08 C6. Don't know what else to take out and be able to maintain what I feel is a nice car. I did have the front seat out, light battery, front roll bar off and maybe a couple more items. Need more to reach my goal of a 10.80.

Same type of weight reduction as you have mentioned. Truly a DD.

RPS LSX BC2 Clutch
Halltech MF103 and Beehive
Vette-Air
Elite Engineering Oil Catch Can
American Racing Headers
Ported TB & FAST LSXR 102 Manifold
EWP
4.10 gears by RPM Transmissions
Assembled by robz , myself, Matt (Tune Time), Mark (Tire Craft)
Tuned by Troy Nikola

Thanks.


Same type of weight reduction as you have mentioned. Truly a DD.

RPS LSX BC2 Clutch
Halltech MF103 and Beehive
Vette-Air
Elite Engineering Oil Catch Can
American Racing Headers
Ported TB & FAST LSXR 102 Manifold
EWP
4.10 gears by RPM Transmissions
Assembled by robz , myself, Matt (Tune Time), Mark (Tire Craft)
Tuned by Troy Nikola
That 4.10 gear is the ticket! Of course mine is an automatic but gearing/converter is where I'm lacking. I have my stock 2.73 gears and a Yank 3200. It makes for a good street converter or for those that want a cam so they can idle up a tad but for 1/4 mile probably not a good choice. I'm looking for a 3.42 out of a C6 but can't find one.

Great job !!!

10.0, that's REALLY quick dude. :cool: :cheers:



Need more to reach my goal of a 10.80.Me too. :devil:

You're faster than any of the cammed Z06s I've seen

drivermod.com.....too many vids of "cammed" z-06's getting beat, or barely beating cars they should DUST.... Thanks to Gary - we can show these viper, gtr, cobra guys what a bolt on z can really do.....

jb

10.0, that's REALLY quick dude. :cool: :cheers:



Me too. :devil:
Thanks again Marc.
drivermod.com.....too many vids of "cammed" z-06's getting beat, or barely beating cars they should DUST.... Thanks to Gary - we can show these viper, gtr, cobra guys what a bolt on z can really do.....

jb

Thanks a lot for the compliment. Much appreciated.

Very awesome to nearly get 9s with bolt-ons! :cheers:
That 4.10 gear is the ticket! Of course mine is an automatic but gearing/converter is where I'm lacking. I have my stock 2.73 gears and a Yank 3200. It makes for a good street converter or for those that want a cam so they can idle up a tad but for 1/4 mile probably not a good choice. I'm looking for a 3.42 out of a C6 but can't find one.
You're not the first to observe that the 3200 is a mild street converter and not the king of the strip. A Yank 3600 (or other true 3600 stall) will do more than gears if you want ET.

Congrats again Gary, 9's next time out!

I'll say it again........WOW........Gary I took your advice and did the BC2. So hopefully....RZO6TTF !! Just kidding ;)

Your runs are truley unbelievable...congrats..




Thanks.......

Congrats on the times.

I cant wait to start modding my car in a couple weeks

Nice run Gary!.Your going to run in the 10.50 index next year, Right?;)

These are the threads that make me want to go out and buy a C6Z. It's amazing how well they respond to mods. :cheers:

Wait until tomorrow's post.:D

I suspect someone's seven liter will be gulping mineshaft oxygen...;)

Wait until tomorrow's post.:D

Its 7:30 am...get out of bed and start typing :zzz:

Its 7:30 am...get out of bed and start typing :zzz:

Never got to catch up on the sleep. Just got ready to go see my daughter play her first lacrosse game. Stay tuned. :D

Congrats again Gary, 9's next time out!
I told ya;)