texasstyle

So, I noticed that I have 6 led lights out on my 3rd brake light SS wing. Does anyone know how to fix them? Or is it too much of a hassle and I should just buy the replacement bar. If that's the case where is the best place to get it from. I tried ebay but couldn't couldn't find it.

It seems to be very common, but no one has a real solution.
thanks guys

Ls1CamaroGuy87

iTrader: (7)

Here's one
http://www.ebay.com/itm/98-02-Camaro...r#ht_500wt_922

rooster99ss

iTrader: (8)

Just replace it. Hawks Third Gen sells them on their site and on eBay as well

texasstyle

thanks.

BoricuaHec01

I have the same problem, havn't gotten around to replacing it, looks ghetto

camaroboy14

iTrader: (8)

Wow that's crazy that they go out like that :/ gotta ck mine

BoricuaHec01

I just found out in the summer, my cousin was inside my garage when I was reversing and he told me I had a few out I wished he never told me. A few weeks ago I saw another 4th gen. SS with the same problem too.

Here's mine....

nascarnate326

iTrader: (1)

I told my self if mine died I would do whatever I could to make the LED's center and symmetrical. Night shade over the un lit portion so it blends into my car.


Cant some LED wiz fix these things?

402GOAT

iTrader: (2)

you can probably buy a replacement led and fix it yourself if you have any soldering skills.

SparkyJJO

iTrader: (11)

The hard part wouldn't be repairing/replacing the LEDs, I think the hard part would be getting inside to do it in the first place. Those probably don't come apart too easily I suspect.

9WhiteCamaro9

That's why in the end I would just buy a full replacement one and be done with it.

BoricuaHec01

Ya, full replacement is the only option. You gotta know how to install it too, think splicing is involved.

88monte

iTrader: (10)

ive replaced mine before. trust me its a lot easier just buying a new piece. i cut mine apart and siliconed it back together.