couple of 11sec passes on the GTO
11-26-2011, 07:33 PM
#1
TECH Fanatic
Thread Starter
Join Date: Jul 2010
Posts: 1,678
Likes: 0
Received 0 Likes
on
0 Posts
couple of 11sec passes on the GTO So I ran a couple of 11sec passes on motor.
1St run ; 11.87@115.77 MPH 1.69 60ft
2Nd; 11.88 at 115.8mph..1.68 60ft
Than it got hot. And it went 12.1 so I stopped running..
D.A WAS IN THE 2100s...shitty
This is full weight.. with 18s in the front
GM CAM
3600 stall
LT's
1St run ; 11.87@115.77 MPH 1.69 60ft
2Nd; 11.88 at 115.8mph..1.68 60ft
Than it got hot. And it went 12.1 so I stopped running..
D.A WAS IN THE 2100s...shitty
This is full weight.. with 18s in the front
GM CAM
3600 stall
LT's
11-26-2011, 09:08 PM
#3
TECH Fanatic
Thread Starter
Join Date: Jul 2010
Posts: 1,678
Likes: 0
Received 0 Likes
on
0 Posts
Grand am cup cam.. 239/251 .570 .570 lift.. stock yellow springs/pushrods
revmax 3600 nitrous stall
Pacesetter LTs. 3Inch catback
Drag springs/ pedders shocks.
Vararam intake.
Stock Tranny
stock intake ls2 Mani.
Stock unported 243s.
revmax 3600 nitrous stall
Pacesetter LTs. 3Inch catback
Drag springs/ pedders shocks.
Vararam intake.
Stock Tranny
stock intake ls2 Mani.
Stock unported 243s.
11-26-2011, 10:54 PM
#5
10 Second Club
Nice times. I had that cam and the heads to go with it. Ran 11.56 @ 123 with 4.56 gears in my 10 bolt. Seriously thinking about sticking it in my SS for kicks. Loved that cam. Made 450 with Mac headers and home made exhaust.
11-26-2011, 11:11 PM
#6
TECH Fanatic
Thread Starter
Join Date: Jul 2010
Posts: 1,678
Likes: 0
Received 0 Likes
on
0 Posts
I can't wait to port the 243s and throw a FAST. In there..
its begging for it.
12-04-2011, 01:32 PM
#7
10 Second Club
That thing should pull past 7k. I had mine set at 7400. It spit a valve out at MIR. Hardest pulling motor I'd ever had in the WS6. Keep working on making that thing breath. Good luck and keep the post updated.
