mrgwrnch

I've been searching numerous threads with no luck. There is an inline CMP connector that sits by the #2 injector connector. It's between #33 & #34 connectors on the first post. I would like to eliminate it from my fabricated harness, but I don't know why it's there. Is it used for diagnostics? Any help would be greatly appreciated.

my bandit

iTrader: (10)

honestly, everything is there for a reason.. if i had to take a stab at it, i would say something to do with the fuel system or coils..

dutinsss

iTrader: (2)

it looks like the MAF sensor connector. it looks like the stock plug is plugged into an adapter harness that's used to run an 85mm vette(i think) sensor.

the_merv

iTrader: (88)

That is a bullshit Connector. IMO there is no reason that should be there. It's the wiring for the Cam Sensor. I take that out everytime I build a Harness.