Gen 5 Camaro Racing Tech, Results - ***Cartek Heads and Cam SS in the 10’s***

Cartek’s Dragan-XR Package set a new record again for NA heads and cam, but this time 10’s! The best ET of the day was a 10.93 backed by multiple 11.00 runs. We would like to point out that this car was driven to and from the track.

Here is the list of modifications:

Kooks 2” long tube headers

Kooks off-road x-pipe

Cartek ported and machined (in house) 4X LS3 heads

Cartek custom grind camshaft

Cartek ported 90MM throttle body

Cartek ported 102MM FAST intake

Cartek custom tuning

Vararam CAI

Under-drive pulley

Monster clutch

Cartek 4.10

http://www.youtube.com/watch?v=ACO8OMtxRiE


Let us know what you guys think…


Thanks,


Julian

(908) 317-4496

www.cartek.net

It's great to have such proven products and reliability! Congrats guys your rocking the 5th gen world.

Very nice
What was ur 60ft

Awesome!

Congrats guys!!

What kind of tires were you guys running?

Sweet! Way to get the beast down the track... Congratulations!!! Not to change the subject, but... Was that other thing a Porsche, Dodge Magnum, what?

Sweet! Way to get the beast down the track... Congratulations!!! Not to change the subject, but... Was that other thing a Porsche, Dodge Magnum, what?


Looked like a Magnum but it was moving pretty good too.

What kind of tires were you guys running?

?????????

?????????

MT ET Streets

Sweet! Way to get the beast down the track... Congratulations!!! Not to change the subject, but... Was that other thing a Porsche, Dodge Magnum, what?

Magnum

very nice
what was ur 60ft

1.551

Thanks for the props PSJ

I shall stir the pot some. One the best running N/A Camaro's I have seen yet. None the one's around here come close to what you have done. But the competition is killing you.


Just bolt ons. No motor work.

http://www.youtube.com/watch?v=ngcQtQ9iiLM

I shall stir the pot some. One the best running N/A Camaro's I have seen yet. None the one's around here come close to what you have done. But the competition is killing you.


Just bolt ons. No motor work.

http://www.youtube.com/watch?v=ngcQtQ9iiLM

There is not way that car is trapping 125 stock. stop being a Troll

There is not way that car is trapping 125 stock.Well, that Mustang is not exactly what I would call 'stock', :) but it is a stock long block (aka: an 'internally stock' motor, stock heads/stock cams etc.).
It does have a lot of bolt on parts thrown at it and of course a lot of weight reduction as well to get it that fast but I do believe it happened. :nod:

yeah it would have to have alot of weight reduction. Ive always considered bolt on parts stock my self. If there is no power added and the long block is stock than its a "stock" car.

good running camaro,i thought abt cartek heads and cam b4 i went afr/g5x3!props too you guys!!

yeah it would have to have alot of weight reduction. Ive always considered bolt on parts stock my self. If there is no power added and the long block is stock than its a "stock" car.

It weighs 3500lbs with driver. Driver is like 170lbs from what I remember. My old manual car(2011) weighed 3580 and I am 210lbs with some minor weigh reduction. It weighed 3580lbs stock withg out me. Base model.