Forced_Induction

Hey guys. Right now my motor is setup NA with 11.4:1 compression and 235 TEA Trickflows. I don't really feel like ripping the motor out and switching to different heads. What would you guys recommend I do? How much boost would you say is safe with my above setup? Also would I be ok with running 235 TEA Trickflows? Seems like everyone is running with stock-Trickflow 225 heads.

sho-me speed

iTrader: (55)

I ran my 11.3:1 347 on 15lbs with meth injection and 93 octane. I would say 10lbs or so and you will be fine. Just run good fuel and be conservative on the timing.

Bob@BruteSpeed

iTrader: (16)

Your 235 TEA Trickflow heads will work great with boost. You'll certainly make a lot of power with them. I'd think you could run at least 8 psi with your compression ratio, and you'll going to see a real nice increase in power. Bob

Forced_Induction

Thanks guys. Those are the answers I was hoping to hear