12 Second Club - First time in the twelves.




View Full Version : First time in the twelves.


Plaugher4
12-03-2011, 02:48 PM
I ran at Marion raceway here in Ohio. The track is old and poorly prepped and just not well maintained. I spun badly for most of the track. I had all mods in sig and ran 30a psi in the nittos. I know I should have lowered the pressure but I didn't feel like dealing with airing them back up. What do you think?

Reaction- 1.05
60ft-2.04
330ft- 5.57
Et @ 594ft- 7.93
1/8- 8.4 @85.90mph
1/4- 12.99@ 108.64mph


blk/slvr02ss
12-03-2011, 03:15 PM
Pretty good for your mods but u need to run 20 PSI to get a better 60ft and a better time !!!

Plaugher4
12-03-2011, 06:44 PM
They hook decent at 20 psi, just ask my ten bolt haha. Slick tired cars were having trouble that night too so I figured searching for traction was useless.


GtoSpd
12-04-2011, 05:56 PM
Not bad for a bad track!

ROMERO98Z28
12-11-2011, 11:33 AM
not bad at all

1FAST07SS
12-14-2011, 11:52 PM
Good job for your mods, just need to get your 60ft down.

xhifer
12-15-2011, 03:03 PM
nice considering the mods.

Plaugher4
01-01-2012, 10:11 PM
Thanks guys, i was determined to get into the 12s that night.

moge11
01-02-2012, 02:06 AM
so whats the full mod list??? no lid??

ROMERO98Z28
01-02-2012, 02:28 PM
mods+2

Plaugher4
01-16-2012, 12:02 PM
Hey sorry for the wait guys, I have a new daughter so I've been busy. Only mods were what is in my sig. No lid. No tune.

moge11
01-19-2012, 02:03 PM
cant believe you dont have a lid... Gut lower airbox, descreen MAF, port throttle body, and do the free mods.. bet it gains over .2 and 2mph.....
...Actually, It will probably pick up more than that, since you have full exhaust. i wouldnt doubt one bit if it gained 3-4 mph with what i listed.

FlatBlackZ28
01-20-2012, 07:47 AM
cant believe you dont have a lid... Gut lower airbox, descreen MAF, port throttle body, and do the free mods.. bet it gains over .2 and 2mph.....
...Actually, It will probably pick up more than that, since you have full exhaust. i wouldnt doubt one bit if it gained 3-4 mph with what i listed.

Not trying to be a dick, but I highly doubt he's going to free up 40rwhp with free mods.

moge11
01-20-2012, 12:10 PM
its not really 40 rwhp.... all the extra airflow at speed will contribute to it...
my car only went 9.39@78 BONESTOCK with a broken trans mount.. fixed that and new torque arm bushing added lid and did the free mods...and boom 8.76@84.. went back a few weeks later, no changes other than some 10 year old discontinued dryrotted goodyears and went 8.37@85.26 with a best mph of 85.55..... as Choked as his engine is with an all stock induction but full exhaust, yeah it might pick up 20-25 hp with Lid, descreen MAF, and Ported T/B.. which would result in 3-3.5mph..
add in the ramair effect from the gutted airbox and possibly 4mph..

The Mighty Texan
01-20-2012, 06:03 PM
Nice job OP! I ran with 35 psi last time i was out :eek2: needless to say, i wont forget to let some air out next time i go lol

Plaugher4
01-27-2012, 08:53 PM
Thanks for all the replies guys, the bottom of the airborne is cut out. I used to have an all lid bur sold it to prepare for the larger maf, lid, throttle body and fast 90 intake. Also my fiance was in the car that run and she weighs around a buck 20, so without her I might have been a tenth faster haha.