LivernoisMotorsports

iTrader: (1)

Several months back, I posted some photos of a 2011 Raptor that we were doing a full build on.... Well here it is



Twin Turbo Stroker Raptor

Regards,

Rick LeBlanc
Livernois Motorsports

06X6spdGTO

iTrader: (6)

pretty badass! Was it the camera or on Idle did it almost sound like a built 5.9 cummins??

LivernoisMotorsports

iTrader: (1)

Thanks!

No, it really sounded like that... I said it sounded like a diesel as well

-Rick

JHR Performance

Very nice build guys. I see the KH on the seats, assuming this is for Al Anabi?

Zach

WSsick

iTrader: (13)

That thing is nasty!


So are those 6.2s related to the 5.0s like our 5.3s are related to the LS3s? Just wondering because you could throw that 400ci motor in a stang then, right?

msydow

they way ford shoulda built the ecoboost
very very nice

BOBS99SS

iTrader: (2)

killer ride , i would love to have that as my dd,nice work guys

LivernoisMotorsports

iTrader: (1)

Thanks for the replies!

You guessed it!

Unfortunately, nothing is interchangeable. Here is a photo I took of a 4.6, 5.0, and 6.2 together...

The block on the left is a 4.6L iron block, followed by an aluminum 5.0L "Coyote" block in the middle, and a 6.2L Raptor on the right.







4.6



5.0



6.2



-Rick

Cold Zero

iTrader: (1)

Nice guys ..

We need Dan Millen in Qatar again ..

SpinsB

iTrader: (5)

clean areas as always

04BlackGmc

iTrader: (19)

nice!

Pipelayaz

iTrader: (2)

I just caught this. I was wondering if you guys finished it or not. Looks great! props on the custom turbo as well. looks really good!

LivernoisMotorsports

iTrader: (1)

Thanks for the replies!

Thank you! Yes, we finished it and put it on a plane to its new home.

-Rick

SSmoken

iTrader: (26)

hopefully he doesnt try to go out and jump stuff

LivernoisMotorsports

iTrader: (1)

We reinforced the frame and rear end.

-Rick

LivernoisMotorsports

iTrader: (1)

Some of the other forums we posted on asked for photos of the truck.

These photos were before the lights were installed on the bumper and before we did some finishing touches































Regards,

Rick LeBlanc
Livernois Motorsports

1slow01Z71

iTrader: (36)

Damn thats badass. Why stock cams and do you have any videos of driving it?

LivernoisMotorsports

iTrader: (1)

We spec'd some custom cams, but they did not arrive in time for this build. Not to mention, with the stock cams, it drives great.

I don't have video of this truck driving, but do have some of a similar build. This one was at lower boost and didn't feel nealry as fast as the one posted above.

Raptor #1

-Rick