camarovon

iTrader: (12)

Hey guys i just bought a 01 ss what do i need to do to run 11:90 without doing a cam

BOBS99SS

iTrader: (2)

m6 or auto?

green28

iTrader: (8)

Is it bone stock right now? And is it an A4 (auto) or M6 (manual)?

BOBS99SS

iTrader: (2)

what does it run now? any mods done,etc sorry you have to be more detailed about your car

camarovon

iTrader: (12)

It's a automatic,with 373 gears and air lid and headers longtube

camarovon

iTrader: (12)

Haven't ran it yet ,and what's the best converter,vigilante,or yank,I wanna stay around 3000 stall

02_camaroz28

iTrader: (20)

Tire and a 3200+ stall with some good DA and maybe some weight reduction Or just a tire and 100 shot.

camarovon

iTrader: (12)

I don't want my car real loud so I left the all muffler on,they say that they perform well ,will it work to run 11:80

green28

iTrader: (8)

Just get a cutout installed. Open it for the track and close it when you want the car to be quiet. You are on the right track since you already have LS6 intake, LT's, and a lid. Other options for bolt-on's would be some sort or ram air setup, port and polish your TB, and add an underdrive pulley. Then add a good stall and a sticky tire and it will get you close. Maybe some suspension work if the car wheel-hops or doesn't hook for you once you hit the track.

1Bad97WS-6

iTrader: (3)

Circle D makes a decent 3000-3200 Stall. Need to run it to get a baseline..

zzracer

iTrader: (33)

Spray it !

moge11

use at least 3600 and you will be close with what you have. cutout too.
3000 stall is weak!... and ET street radials too of course.

blk/slvr02ss

iTrader: (21)

Yank SS3600 Stall and a good sticky tire and u should see 11's in cold air !

camarovon

iTrader: (12)

Will the yank 3600 work driving on the highway,and what's the best way to get a tune,diablo,HP timers,or efi live?

02_camaroz28

iTrader: (20)

The converter will lock up and drive fine on the highway. Look into a Frost mail order tune. Tunedbyfrost.com

1Bad97WS-6

iTrader: (3)

I was gonna go 3000-3200 stall but I read on here and people keep'd saying go big so I went with a SS4000 stall and 373s. I'm installing them this winter and TR55,new knock sensors.

green28

iTrader: (8)

Same setup I'm running SS4000 and 3.73, fun on the street and works good at the track. I was going to go SS3600 but the more I read on here decided to go 4000.