Dyno Guesses & Bench Racing Forum - LS1 stock cam vs 02-04 LS6 cam

Has anyone done a before and after dyno?
Thanks

You mean an ls1 with an ls6 cam?

No dyno here yet but went 13.1 @108mph on 2.1 60ft with 324rwhp/ and 12.8 @ 110mph on a 2.0 60ft (DA was -327 on stock pass, 127ft on ls6 cam pass)

Gains at the track suggest 20ish on my stock tune.

If you get dynoed let me know! I'm curious to see your results with the 243s.

No dyno here yet but went 13.1 @108mph on 2.1 60ft with 324rwhp/ and 12.8 @ 110mph on a 2.0 60ft (DA was -327 on stock pass, 127ft on ls6 cam pass)

Gains at the track suggest 20ish on my stock tune.

If you get dynoed let me know! I'm curious to see your results with the 243s.

Yea man, saving for a dyno tune.

ls1 cam and 3.23 10-bolt = 354rwhp
ls6 cam and 3.73 12-bolt = 372rwhp

ls1 cam and 3.23 10-bolt = 354rwhp
ls6 cam and 3.73 12-bolt = 372rwhp

so basically a 30rwhp gain? That's def not worth the hassle.

18 rwhp gain.

18 rwhp gain.

I just threw a figure out there. Considering a good tune, it would be at more than 30whp.

so basically a 30rwhp gain? That's def not worth the hassle.

Sure it is... cause on top of putting the LS6 cam in my t/a, i added LS2 243 heads...:D

18 rwhp gain.

Where did you find/get that number?