Silver2000WS-6

iTrader: (1)

I am trying to wire in a LQ4 into a tube buggy and am very new to all of this. I am needing to add an OBD port to it and have a few questions on which ones I can use. The harness is the original truck harness off from the '99 truck so I know that an OBD port from a '99 would work, but what else would? Just wanting to know so that I can broaden my range while looking for a good deal. I haven't found much on this topic so any help would be much appreciated.

Thanks,
Chase

i r teh noobz

iTrader: (4)

Mine came from a late 90's Alero for an 02 truck harness. They're all pretty much the same from what I've read.

Silver2000WS-6

iTrader: (1)

Thanks, I have access to a port off a '97 Chevy truck. Maybe I will go try it.

salemetro

iTrader: (5)

Anything after '96 or so is the same. As always, just make sure to wire it in correctly as per your schematic.

rotor vs. piston

iTrader: (3)

Just adding, to the same. Get any '96+ port and pin it for your config and you're good.

Silver2000WS-6

iTrader: (1)

I have got a lot of good info from everyone on my recent questions.. Thanks