lemkerailroad

i found a thread not to long ago from someone here on the forums that did a f body dash swap into a g body and now i cant seem to find the thread

can anyone point me in the right direction please


dave

Prorac1

iTrader: (4)

https://ls1tech.com/forums/conversio...-features.html

Miles.

I did this in mine. I still have to buy a good dash pad and cut it to fit, but I have the dash in place and all of the gauges working. Unfortunately I grenaded the engine and haven't touched the car since. I got a nice little camera for Christmas so maybe I can snap some pictures like I've been meaning to. The wiring was cake, I just used the MC fuse box and stripped the Camaros fuse box from the dash harness and just ran the wires I needed. For the first time since I've owned the car I have a working tach lol. I used a 97 LT1 cluster since the 98+ use a different tach signal.

the_merv

iTrader: (88)

I just used a 95 Z28 Cluster in the stock Gauge Bezel. I'm looking into having mine professionally done tho to make it look alot better than it currently is.

lemkerailroad

so a 4th gen f body

think i may sublet this project out so it looks factory when i get the body back from paint in a month or so

any takers in the sw ohio area.....lol