carlos sauceda

iTrader: (3)

So was installing my torque converter and noticed my flexplate was cracked by the 3 bolts. What brand do yall folks reccomend for a new one. Its between the HUGHES PERFORMANCE, B&M, AND TCI. lmk kno if u have any experience with any of those

DopeFedZ

iTrader: (34)

I have a stock one in the garage if you want it.

carlos sauceda

iTrader: (3)

Nah thanks los but i realy dont wana have to remove the tranny again lol. Appreciate the help tho.

Lockdown99ss

iTrader: (1)

I'm a fan of the Hughes SFI flexplates. I'm rough on my car and it hasn't given me any problems. May have to get the idle retuned down though. I idled about 150-200rmp's higher after the beefier flexplate was installed

FlashWS6

iTrader: (18)

I had a tci flexplate in the camaro

1990LSx

iTrader: (9)

I would run the Hughes. I think circle d sells their own and its the hughes with circle D's name on it.

Footlead

iTrader: (18)

Yank sells a SFI Flexplate for $79.99 !!

00pewtertransam

the hughs i bought was junk. was warped and almost ruined my damn pump in my trans. get yourself a TCI and call it done.

carlos sauceda

iTrader: (3)

Ok so its down to the hughes and tci....

1990LSx

iTrader: (9)

how did you determine it was warped? If it was warped I would think you would of noticed it right out the box.

I had a Circle D flexplate and its awesome. i would give Chris and crew a call.

http://www.circledspecialties.com/p-...lex-plate.aspx

WS6tx

iTrader: (25)

Tci is Said to be the best. That's what I went with.

carlos sauceda

iTrader: (3)

Were there any issues installing the tci flexplate?? I have a circle d stall.

carlos sauceda

iTrader: (3)

Anyone?

Rob's 02 SS

iTrader: (31)

Get the stock one from los.

carlos sauceda

iTrader: (3)

I already have a tci. If i have issues ill just pick the stock one up

Circle-D

iTrader: (21)

I think we are a little late to the thread......But we keep the hughes style and our CNC billet bad boy in stock. Be glad to help answer any questions about LS flexplates. We have done extensive research on them.

Chris

Rob's 02 SS

iTrader: (31)

Any pictures of the cnc billet bad boy? And do you have one for a th350 swap?

Jake_the_Snake

iTrader: (5)

i run the tci. installed just fine and has survived some good launches on a bolt on lt1. i'd recommend it

carlos sauceda

iTrader: (3)

Yea i already got the tci one.. its going in pretty flawless... almost ready to test out my new circle d converter n cam

carlos sauceda

iTrader: (3)

So we got everything back in and i cant say how happy iam with my car.. lots of problems n fixing along the way but im happy *** hell now that its all done. Thanks to alot of sponsors on here.