Ole Z28

Hey everyone,

Im finally doin a camswap on my 99 Z28, and I figuered the vrx3 would suit the best for my needs.
I was wondering what people who allready have this cam use for Valvesprings or what you guys would suggest?

The camspecs are:

226/228 .585/.588
112 or 114 LSA not sure yet.

Thanks for your help!

supersick99z

iTrader: (66)

I'd use comp 918's if I were you. Relatively cheap and they will work with that cam.

poltergeist 02

iTrader: (65)

i would go with pac springs 1218's or 1518's.

redbird555

iTrader: (14)

i agree on pac 1518's or psi max life. vengeance also recommended him a c5r chain and comp 850 lifters? Normally i wouldnt second guess a sponsor like this but that seems a little overkill in my mind I say use new ls7 lifters and an ls2 chain and call it a day its not like were using a >.600 lift cam here. but hopefully someone can throw in their .02 also

Jason 98 TA

iTrader: (4)

Chekout the prc .650" spring kit, the double spring is typically safer and should have a nice long life!

1999BlueTA

iTrader: (34)

To the OP, there's a brand new set of pac 1218s fs in the parts classified for $125 shipped I would jump on those if I were you!!!