Nitrous Oxide - Tips for installing a NX wet kit

I will be installing the NX wet kit & GenX accesiory kit w/MSD window switch on my 2000 T/A Ws6 this weekend, and I was wondering if anyone could provide me with some tips and pointers. I looked over the instructions which I can say isn't the best. First the only pitcure that they have is black & white and blurry as hell. Just hoping someone who has installed one before could give some pointers....thanks.....Michael

I don't know if I'll be of much help, but if you follow the wiring closely, it's pretty straight forward. The biggest obstacle I had was figuring out just where I was going to mount everything. I ended up putting the window switch on the passengers side fender, and my noids are mounted right above the fuel rails. I ran the wiring back throught the existing looms to the back of the engine and then over to behind the computer. My nitrous line comes in through the grommet that's behind the computer and my switch wires run through there also. As finished it was really pretty clean, and most of the wiring hides behind the computer. If you email me I'll send you some pics. opz282@aol.com