f body dash in g body
01-10-2012, 12:57 PM
#1
On The Tree
Thread Starter
Join Date: Sep 2011
Location: dayton ohio
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
f body dash in g body guys i need some help please
i am planning on installing a 4th gen f body dash in my 81 regal
i need help in gathering a list of items needed to do the conversion
i have looked at a few dash swaps and see alot but not to much info on what all it takes to do the swap
does someone have a list or remember what all had to be swaped
looking to do dash, coulmn, dash harness, srs and body module
but what else do i need to finish the job is what im asking
and if anyone has any diagrams or info they might have that they made during the swap to aid in the install
i am a 40yr old kid at heart that has gone back to college and need to get this project done by may to get a grade in a few of my classes that i took along with chassis dynoing the engine build im doing also
if you can help that would be great and thank you
dave
i am planning on installing a 4th gen f body dash in my 81 regal
i need help in gathering a list of items needed to do the conversion
i have looked at a few dash swaps and see alot but not to much info on what all it takes to do the swap
does someone have a list or remember what all had to be swaped
looking to do dash, coulmn, dash harness, srs and body module
but what else do i need to finish the job is what im asking
and if anyone has any diagrams or info they might have that they made during the swap to aid in the install
i am a 40yr old kid at heart that has gone back to college and need to get this project done by may to get a grade in a few of my classes that i took along with chassis dynoing the engine build im doing also
if you can help that would be great and thank you
dave
01-11-2012, 11:59 AM
#3
On The Tree
Thread Starter
Join Date: Sep 2011
Location: dayton ohio
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
the other thing i forgot to mention is what are you guys using for heater box assemblies
are you using f body or the g body units of meshing both together
are you using f body or the g body units of meshing both together
02-11-2012, 03:45 PM
#5
This guy did it..
https://ls1tech.com/forums/conversio...-features.html
I'm working on blending the 1995 Z28 Cluster into my stock 1984 Gauge Bezel..I had it setup before once, going for more of a factory look.
https://ls1tech.com/forums/conversio...-features.html
I'm working on blending the 1995 Z28 Cluster into my stock 1984 Gauge Bezel..I had it setup before once, going for more of a factory look.
