View Full Version : What head bolts and intake bolts do I need to run my vortec heads?

01-12-2012, 03:54 AM
O.k. so this is my second project I have a 1986 el camino all fixed up except the 307 that came in it fianlly gave out and now I'm going to a 350ci target engine that I'm removing the heads and replacing with rebuilt vortecs 062's can I use the old school head bolts or do I need new ones being that these are vortecs and also do I need new Intake bolts for the new vortec intake. I'll be running for now the edelbrock 600cfm electric choke carb, performer rpm vortec intake,and the 062 vortec heads, and the compcams xe 262 cam. Later I will get the 650cfm carb but the 600cfm for now since thats what I have currently. Any part #'s for the bolts will be great.

01-17-2012, 10:08 AM
Head bolts are standard sbc stuff I would put new in. As for the intake bolts use the gm ones I don't have part number off hand but go to a dealer and order for 96-00 pickup with a 350 and they will be the right ones