what headers are people runnin in ls swap foxes
#2
With stock K member, brp hot rodz.
With aftermarket, it seems Dynatech and Kooks are popular. Im planning a swap now, and Im amzed at all the complaints on fitment for Dyna/Kooks. Admittedly, most are old threads and they have supposedly updated designs. Im personally leaning towards BRP. Pics that I found of their design makes it look like they have the most clearance.
***
Full disclaimer, Ive barely started my swap, and have 0 hands on experience yet, just what I have read/ seen in pics.
With aftermarket, it seems Dynatech and Kooks are popular. Im planning a swap now, and Im amzed at all the complaints on fitment for Dyna/Kooks. Admittedly, most are old threads and they have supposedly updated designs. Im personally leaning towards BRP. Pics that I found of their design makes it look like they have the most clearance.
***
Full disclaimer, Ive barely started my swap, and have 0 hands on experience yet, just what I have read/ seen in pics.
#5
TECH Fanatic
iTrader: (25)
Join Date: Nov 2001
Location: SC
Posts: 1,784
Likes: 0
Received 0 Likes
on
0 Posts
If going with the Foxbody headers with LSx flanges, be sure to look at your transmission linkage. should not be an issue with a manual but with my TH350 set up there was no way to get the linkage on the trans. and if I removed the header to set up linkage there was not enough room.
Might can overcome this if paying attention when welding up the flanges.
Might can overcome this if paying attention when welding up the flanges.