spark plug wires for flipped manifolds
01-13-2012, 07:53 AM
#3
TECH Fanatic
Thread Starter
Join Date: Jul 2010
Posts: 1,678
Likes: 0
Received 0 Likes
on
0 Posts
01-13-2012, 10:15 AM
#6
That won't work they will still be laying on the manifolds. Get a set of MSDs that you build your self or call magnacore with custom lengths. You will have to go around the front of the head or around the rear. If the wire is close to the manifold it will cause troubles.
01-14-2012, 07:55 AM
#7
TECH Fanatic
Thread Starter
Join Date: Jul 2010
Posts: 1,678
Likes: 0
Received 0 Likes
on
0 Posts
That won't work they will still be laying on the manifolds. Get a set of MSDs that you build your self or call magnacore with custom lengths. You will have to go around the front of the head or around the rear. If the wire is close to the manifold it will cause troubles.
Trending Topics
01-14-2012, 04:59 PM
#11
TECH Fanatic
Join Date: Oct 2011
Posts: 1,425
Likes: 0
Received 0 Likes
on
0 Posts
01-15-2012, 08:58 AM
#18
TECH Fanatic
Join Date: Oct 2011
Posts: 1,425
Likes: 0
Received 0 Likes
on
0 Posts
Do they not make a boot & wire cover that will work for these style wires? I have some boot covers that I used on my Big Block. Of course they wouldn't work but some that had a bigger hole in the center would.
