XER 224/228 .581/.588 112+2
03-03-2003, 01:58 AM
#1
TECH Apprentice
Thread Starter
iTrader: (1)
Join Date: Jan 2002
Location: Orlando, FL
Posts: 342
Likes: 0
Received 0 Likes
on
0 Posts
XER 224/228 .581/.588 112+2 Anyone have any thoughts or actually run this cam?? I just bought one <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
03-03-2003, 10:43 AM
#3
On The Tree
Join Date: Dec 2002
Location: Orlando, FL
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Re: XER 224/228 .581/.588 112+2 CKZ,
I was having trouble with the idle on the car with that cam on a 112 ICL. I did not have the transmission installed when we initially fired it up. For whatever reason once the transmission was installed (A4) the idle is now solid with no surging. It appears having so many A4 codes thrown was impacting the engine control. Why? I don't know. I should have the idle totally tweaked today. I have the idle speed set to 975 right now. It can go lower but I'd rather keep it up a bit and avoid any idle issues.
Tim
I was having trouble with the idle on the car with that cam on a 112 ICL. I did not have the transmission installed when we initially fired it up. For whatever reason once the transmission was installed (A4) the idle is now solid with no surging. It appears having so many A4 codes thrown was impacting the engine control. Why? I don't know. I should have the idle totally tweaked today. I have the idle speed set to 975 right now. It can go lower but I'd rather keep it up a bit and avoid any idle issues.
Tim
