Eagle 4inch stroker crankshaft
#1
Teching In
Thread Starter
Join Date: Oct 2008
Location: WA
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Eagle 4inch stroker crankshaft
Category: Engine - Power Adders
Price: $432
Location (State): WA
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9
LS Engine?: Fits LS Engine
The crankshaft was installed on a 6.0 truck motor, but after trying to start the truck with no success we realized that we needed one with a 24 tooth reluctor instead of a 58 tooth reluctor. So that is about as "used" as it got, it was put back in the box and sealed up. You can e-mail me at cameronluttrell@gmail.com
Here is a pic of the crankshaft
Last edited by mr2cam; 02-03-2012 at 02:03 PM.
#4
Teching In
Thread Starter
Join Date: Oct 2008
Location: WA
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
I'm a little confused right now, I could have sworn I talked to a guy at summit racing and we looked it up and he said the crankshaft would not work with the 5.7..
#6
TECH Apprentice
iTrader: (59)
Join Date: Jul 2004
Location: NJ
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
Theres quite a few crank setups available depending on how u order it. Stock cranks.... 3 cranks available.
1- short snout w/24x wheel
2-short snout w/58x wheel
3-Long snout w/58x wheel
Keep in mind you can wheel reluctor wheels
1- short snout w/24x wheel
2-short snout w/58x wheel
3-Long snout w/58x wheel
Keep in mind you can wheel reluctor wheels
Trending Topics
#8
crank
i looked at summits link u had on there and i looked at the other ones they had on there site . the snout on one is short and one is standard is the difference only how close it is to the timing cover . if this will work on my motor i want it
#10
Teching In
Thread Starter
Join Date: Oct 2008
Location: WA
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Guys sorry I should have put this on here before but I have a sale pending right now, I have about 20 e-mails and there are 2 guys that pmed me first that are waiting on shipping price, I will let you guys know if they don't take the crankshaft.